How about CSL+EXOv3+EXOv2

512detail

512detail

New member
I have a few bottles I need to get rid of before they go bad...so I was thinking

CSL+ EXO v3 and then EXO v2

am I just crazy? I think I`m gonna at least try this on a fender

definitely not practical for customers or anything like that but I love me some experimentation and the car is up for a good washing and I am getting tired of looking at the marring on the passenger side, time to polish it and since the clear is pretty thin I`m gonna go ahead and coat it with something

either Cosmic v2
or some GTECH cocktail

thoughts?
 
ok so how about the logistics


I know I can top CSL with EXOv3 almost immediately...but should I wait a day or two to top with the EXOv2 ? car is gonna be in the garage for several days as it is raining all week and into the weekend and I work from home so it`s not going anywhere
 
I have CSL+EXOv3 against CSL+EXOv2 and I like certain things about both of them so I decided I`d like to try this to see if I can have my (shine) cake and eat it too. hahahaha
 
On their site there is only a time limit on the EXO being applied over the CSL it doesn`t say anything about EXO coats requiring any length in between


Sent from my iPhone using Tapatalk
 
Shouldn`t be a problem applying exo on exo at whatever time. Here`s an email I sent to Rob at Gtechniq a couple of years ago:

Hi Kevin,

No problem at all.` I would recommend prepping the surface with Panel wipe prior to application to get the best bond.

Rob

From:`Kevin C. Welch [mailto:]`
Sent:`20 January 2014 00:48
To:`Robert Earle
Subject:`RE: delayed EXO v2 application

Rob,

How much of problem would it be to apply exov2 over exov2 applied 6m prior as sort of a maintenance coating?
Click to expand...

(Sent via my mobile device...)
 
512detail said:
ok so how about the logistics
I know I can top CSL with EXOv3 almost immediately...but should I wait a day or two to top with the EXOv2 ? car is gonna be in the garage for several days as it is raining all week and into the weekend and I work from home so it`s not going anywhere
Click to expand...

Cool! Looking forward to seeing what you do. From my own CLS + EXO application research Gtechniq recommends apply EXO within a 24hour window after applying CLS.

If still you have any EXO left over, pls let me know - I may end up needing a small amount to recoat the area I scratched if Essence + doesn`t work > re-polishing is needed.
 
well I was slowly working at the car, got it fully decon`d and clayed and was gonna polish tonight but I have a drop off tomorrow and its supposed to rain so I will need my garage so I am kind disappointed as now I will have to wash and decon again! dangit! and my ocd won`t let me put my potentially naked paint outside even for half the day in the sun so I guess I will put some QD+ or something on there for a days worth of protection
 
You must log in or register to reply here.
Back
Top