Barry Theal
New member
Hello everyone. Hope all is well. I been real busy as of late and got a lot of things going and I thought I would share a new product I've been using. The product is called Finish-it and its manufactured by a company called HiLustre. HiLustre is a company based out of California, IMHO they are gonna be a big competitor in the market of detailing products. Anyway I had a real close friend of mine just get a Tahoe fully repainted it and ask me to fix the painters mistakes. I have been using Finish-it on several test panels for a few days and thought I would share some results with you. This product is a water based Non- Dimishing product. All I can say so far is wow!!!!!!!!!! Here are some of the results I was able to produce. This paint has no depth and is a real ****** job. Orange peel is bad. There is no clarity at all.
I first dry sanded the masked off area with 3m trizact 1500 and then wetsanded it with Norton 3000. Both were done By a D/A.
Here is what it looked like sand flat.
Once sanded I used Finish-it on a Wool pad and rotory, and then I finished down with a dual action polisher and a orange foam pad. With two steps I went from flatly sanded paint to LSP ready paint. These pictures results are after 3 ipa wipedowns.
Here is a camera flash on the sanded side.
Here is a camera flashes on the finished side.
Here is a reflection shot with no flash to show some depth and clarity. After looking at this picture you can tell I'm married with kids lol. Boy my face is get chubby. :lol
Anyway guys ill keep you updated as I go. I'll be doing this vehicle over the weekend. ILl get some really good shots for ya. As of now this product is gonna be my new goto product!
Barry

I first dry sanded the masked off area with 3m trizact 1500 and then wetsanded it with Norton 3000. Both were done By a D/A.


Here is what it looked like sand flat.

Once sanded I used Finish-it on a Wool pad and rotory, and then I finished down with a dual action polisher and a orange foam pad. With two steps I went from flatly sanded paint to LSP ready paint. These pictures results are after 3 ipa wipedowns.

Here is a camera flash on the sanded side.

Here is a camera flashes on the finished side.


Here is a reflection shot with no flash to show some depth and clarity. After looking at this picture you can tell I'm married with kids lol. Boy my face is get chubby. :lol

Anyway guys ill keep you updated as I go. I'll be doing this vehicle over the weekend. ILl get some really good shots for ya. As of now this product is gonna be my new goto product!
Barry