Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
Style variation
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Here are results, my camera sucks 2.0
- Thread starter AutoNova
- Start date
nosed_b18b
New member
Nice dood. What did you use??
Well I tell you I scrubbed with citra-gel first and that did not work. Then I took some OOPS and rubbed on it a bit and that was minimal. Finally I just turned up the pressure washer and attacked each spot as best possible then clayed. I wonder if some GOO gone might have done the trick?
imported_kgb
New member
Don't use that goo gone or oops too much man. I removed a bumper sticker off of my dad's car with goo gone and it discolored the bumper where the goo gone was and where it ran down.
2001civicex said:Don't use that goo gone or oops too much man. I removed a bumper sticker off of my dad's car with goo gone and it discolored the bumper where the goo gone was and where it ran down.
What are you using for tough sap stains?
IPA (Isopropyl Alcohol) works alright, you can try WD-40 as well. I've had good success with Turtle Wax Bug and Tar Remover.
You might want be a bit careful with the powerwasher. You can end up embedding particulates in the paint if you use to sharp an angle or too a PSI on the washer. Using a pressure washer can actually cause it to be more difficult to remove things off the paint.
You might want be a bit careful with the powerwasher. You can end up embedding particulates in the paint if you use to sharp an angle or too a PSI on the washer. Using a pressure washer can actually cause it to be more difficult to remove things off the paint.
I agree on the power washer, I think next time my plan will be to use some mineral spirits to soften it up a little then I will use my PC or rotary with a light cut to see if I can take anymore off that way and then finish up with a clay. I need to get some Min. Spirits in my arsenal.