Help! What the heck am I doing wrong???
- Thread starter old_gonzo
- Start date
imported_TLMitchell
New member
Might not be you. There were some recurring threads on AGO a while back involving a couple of detailers having pad problems and a LC rep. Sounded like they were sending them reformulated pads to try out with mixed results.
I'd be contacting LC, it appears they're having some problems with some pads, particularly the H2O-techs.
TL
imported_Luster
New member
I 100% agree. Contact Lake Country, send them those pictures and let them answer the question.
Some of my pads are almost 5 years old.
imported_The Pad Man
New member
H20 Pads
Nick, I was forwarded your post and have read what has happened. I have some of the original H20 pads and so far they have been holding up. I can totally understand your frustration though. I will stand behind my products. When you have a chance you can call me (262-367-8395) or email me at the factory here. I will get this taken care of.
[email protected]
Eric
Nick, I was forwarded your post and have read what has happened. I have some of the original H20 pads and so far they have been holding up. I can totally understand your frustration though. I will stand behind my products. When you have a chance you can call me (262-367-8395) or email me at the factory here. I will get this taken care of.
[email protected]
Eric
Old Pirate
AMG Classic Car Detailing
Thank you Eric........:clap:
imported_CARFREAK
New member
are you sure your compressed air isn't blowing too hard and causing the foam to separate ?
Nick Chapman
New member
Just got off the phone with Eric, he's aware of my problem and has seen the pictures. Lake Country is a stand up manufacture, and although I declined, he offered(actually insisted) that he send replacement pads to replace the ones I had problems with. No worries Eric! I'm going to make a contious effort to pay attention to my buffing techniques with these pads, and I should have more answers for you soon.
Nick
Nick
Thanks for sharing Nick!
This is rare case when i always succeed and end up with expectable result of using LC pad with various kind of products such as 3M, Menzerna or Megs. The problem should be defined with the right person. In this case, Eric might be that guy and should has this pad for inspection. Update of the problem will be very appreciated.
This is rare case when i always succeed and end up with expectable result of using LC pad with various kind of products such as 3M, Menzerna or Megs. The problem should be defined with the right person. In this case, Eric might be that guy and should has this pad for inspection. Update of the problem will be very appreciated.
imported_User Name
New member
Nick,
Is it worth sending a pad from "your batch" to another trusted pro and see what happens?
I like the idea of eliminating as many variables as possible. What happens if you send one to Kevin Brown and he has the same issue?
Did you order all in one batch or have they come from separate orders, presumably from pads which were made at different times?
Is it worth sending a pad from "your batch" to another trusted pro and see what happens?
I like the idea of eliminating as many variables as possible. What happens if you send one to Kevin Brown and he has the same issue?
Did you order all in one batch or have they come from separate orders, presumably from pads which were made at different times?
Old Pirate
AMG Classic Car Detailing
Nick, please let me know if anymore problems come up with your pads or any other problem comes up. We 're here to make sure everyone is happy with their products.................Angelo