3m body repair rubbing compound Fine cut
- Thread starter vick-e
- Start date
Accumulator
Well-known member
I somehow doubt that it's the same as either the FI or the PI stuff, but I don't really know. What's the 3M part number?
Accumulator
Well-known member
Yeah, 3900 is the part number but I won't be of any help as I'm not familiar with that product 
Sorry...
But if it works that slowly then at least it's not too aggressive. That's the blessing and the curse of the good 3M RCs. Sorta frustrating having to work on something that long, huh?
If you're using it by hand, that's just how it's gonna work. If you're using a PC, you can try a more aggressive pad (and always work at speed 5 or 6).
Sorry...But if it works that slowly then at least it's not too aggressive. That's the blessing and the curse of the good 3M RCs. Sorta frustrating having to work on something that long, huh?
If you're using it by hand, that's just how it's gonna work. If you're using a PC, you can try a more aggressive pad (and always work at speed 5 or 6).
=) gona try it with a brand new pc tomorrow!!! thats if it is not raining.
well hopefully someone here will give me a good answer.
i tried emailing them but still no reply for 2 weeks now.
Edit: woops i just read my own reply and the good answer part sounded bad. hopefully i did not offend you. i meant good answer meaning a solid answer if the product i have is in fact the perfect it series products.
well hopefully someone here will give me a good answer.
i tried emailing them but still no reply for 2 weeks now.
Edit: woops i just read my own reply and the good answer part sounded bad. hopefully i did not offend you. i meant good answer meaning a solid answer if the product i have is in fact the perfect it series products.
6']['9 said:Writing>Mesorry i wrote that wong
3m
FI~finess it
FC~ Fine Cut
RC~Rubbing Compound
MG~Machine Glaze~\
PI~Perfect It
FG~Finishing Glaze
IHG~ Imperial Hand Glaze
MP~Machine Polish
Now remember theres PI II and PI III, and now theres PI 3000
Those are correct. What was the point you were trying to make?
I actually baught it at Zellers, but i think i have seen it at walmart before.
thanks for all the info. i just wonder why they dont call it perfect it.
i checked if it was in the perfect line because it was the closest thing i found, and the labels on them are different i think.
the 3m fine cut i read on the product review section says it removes 1200 grit and finer while my bottle says 1500 grit.
just the little differences but i still just wanted to make sure.
well ill be using it with a pc most likely tomorrow hope fully it turns out real good!
THANKS FOR ALL THE RESPONSES
thanks for all the info. i just wonder why they dont call it perfect it.
i checked if it was in the perfect line because it was the closest thing i found, and the labels on them are different i think.
the 3m fine cut i read on the product review section says it removes 1200 grit and finer while my bottle says 1500 grit.
just the little differences but i still just wanted to make sure.
well ill be using it with a pc most likely tomorrow hope fully it turns out real good!
THANKS FOR ALL THE RESPONSES
well thats the product i have. can anyone else take a look and see if these are infact perfect it or finese series compounds...im still trying to determine how abrasive these are. after reading the detailing guide by david...it says not to use compounds on cars...and now im afraid too...my pc has been delayed for till feb 10th...
http://products3.3m.com/catalog/us/...eisure_3_0/command_AbcPageHandler/output_html
M Id : 70-0707-2734-5
GTIN(UPC/EAN) : 0 00 51131 03900 1
l
http://products3.3m.com/catalog/us/...eisure_3_0/command_AbcPageHandler/output_html
M Id : 70-0707-2734-5
GTIN(UPC/EAN) : 0 00 51131 03900 1
l
Accumulator
Well-known member
I go out on a limb here and say it's almost certainly OK to use it as long as you apply common sense. I don't see anything on that 3M link that would scare me off and hey, you've already used it right? Since you said how long it takes to remove marring with it, I think it's safe to assume that it's pretty mild.
I certainly don't want to :argue with David, but there are compounds and then there are compounds if you know what I mean. Many of the 3M "compounds", at least the fine cut ones, are actually quite mild (though they can really cut when used by rotary). Using it by PC shouldn't make it much more aggressive than it is by hand and sometimes using the PC actually seems to make products behave *less* aggressively since the work is more evenly distributed over the area of whatever pad you're using.
Do be prepared to follow up with a milder, but still abrasive, polish. Something like 3M PI-III Mg (05937).
I certainly don't want to :argue with David, but there are compounds and then there are compounds if you know what I mean. Many of the 3M "compounds", at least the fine cut ones, are actually quite mild (though they can really cut when used by rotary). Using it by PC shouldn't make it much more aggressive than it is by hand and sometimes using the PC actually seems to make products behave *less* aggressively since the work is more evenly distributed over the area of whatever pad you're using.
Do be prepared to follow up with a milder, but still abrasive, polish. Something like 3M PI-III Mg (05937).
ahhh ok ok thank thank you.
i tried it again yesterday and one fender took 30 mins...by hand.
it looked it still has some left over swirls.
but ya it it took a lot of pressure and elbow grease to get one fender nicely cleaned.
i emailed 3m...to ask what my compound is so i will let everyone here know as soon as they email me back
i tried it again yesterday and one fender took 30 mins...by hand.
it looked it still has some left over swirls.
but ya it it took a lot of pressure and elbow grease to get one fender nicely cleaned.
i emailed 3m...to ask what my compound is so i will let everyone here know as soon as they email me back