Chicagoautopros
New member
This is an amazing car. The curves on this baby will leave you drooling. I am privileged to be able to work on these beautiful cars and to be able to apply fine products like CQuartz Finest making cars like these look they way they were meant to. Customer brought this car to us and wanted to make sure it got the best treatment, so that's exactly what we gave it.
Before we start the coating process a thorough wash and decontamination are necessary. This beauty only had 300 miles on it, but still needs to be surgically clean for optimum results. We take off licence plates and clean every surface down to the last bolt. We use a clay bar to get embedded contaminants off the paint leaving the surface smooth as glass.
After the wash process we must prep the paint for the coating. We take the necessary steps to compound and polish any defects out of the paint leaving a perfectly flawless surface. We tape up any trim pieces prior to buffing to prevent any damage or staining. Panel by panel we polish then examine paint with a led light making sure all swirls and scratches are eliminated.
You might be thinking this new car with only 300 miles shouldn’t have any scratches on it! Unfortunately a new car after production can be damaged in just a short time. From transport a car can get pretty dirty and after being dropped off at the dealer can sit on the lot and receive a lot of not so proper carwashes.
The car will have to be wiped down with an isopropyl alcohol solution and the CQuartz Finest application will start. We will coat every inch of the exterior with CQuartz Finest with not one but two coats. The rims will receive Opti-Coat Pro treatment.
We will let the results speak for themselves.
Before we start the coating process a thorough wash and decontamination are necessary. This beauty only had 300 miles on it, but still needs to be surgically clean for optimum results. We take off licence plates and clean every surface down to the last bolt. We use a clay bar to get embedded contaminants off the paint leaving the surface smooth as glass.
After the wash process we must prep the paint for the coating. We take the necessary steps to compound and polish any defects out of the paint leaving a perfectly flawless surface. We tape up any trim pieces prior to buffing to prevent any damage or staining. Panel by panel we polish then examine paint with a led light making sure all swirls and scratches are eliminated.
You might be thinking this new car with only 300 miles shouldn’t have any scratches on it! Unfortunately a new car after production can be damaged in just a short time. From transport a car can get pretty dirty and after being dropped off at the dealer can sit on the lot and receive a lot of not so proper carwashes.
The car will have to be wiped down with an isopropyl alcohol solution and the CQuartz Finest application will start. We will coat every inch of the exterior with CQuartz Finest with not one but two coats. The rims will receive Opti-Coat Pro treatment.
We will let the results speak for themselves.
