Greg Gellas
I'm Greg :)
Haven't posted here much, I decided to add a post from some previous work I have done. Expect quite a few more write ups shortly once I get them all squared away...
First I want to thank DJ Mayo, David Fermani, and Barry Theal for their ideas and thoughts on this detail.
I got an email from the owner and said his Audi had some mold. I have done some light mold work before and wasn't too worried about it :cool1: I decided to go check out the car to put together a more exact estimate. This Audi had a leak coming from the firewall, causing the drivers side floor to be soaked. It was put away in a garage for about 4 months or so for the winter.
So what does 4 months of wet car interior look like...:sick1:
After some discussion, and research, I decided to use an Enzyme Mold Cleaner called sporicidin. I knew this would be a two day project. I suited up, using a mask, gloves, long sleeve shirt tucked into the glove, and some old pants. I was going to throw away everything I was wearing so I looked like pretty silly
I diluted it in a bucket, and in a spray bottle. Not wanting the mold to get airborne I sprayed everything down with the sporicidin mixture and let it sit for a few minutes. Even after just spraying I saw a huge improvement. I was concerned about pitting on the leather but fortunately the mold wasn't on there long enough to pit the leather. I then continued to go over the entire interior with towels from the buckets rinsing after about every square foot or so, I wanted to remove it not spread it around.
Even though I was using the sporicidin I decided to break out the steamer to assist in the mold killing. I have a Polti 2085 steamer that is absolutely amazing at producing steam, I don't know what I would have done without it. I steamed the carpets and lightly hit the seams of the leather. The air ducts were steamed also.
First I want to thank DJ Mayo, David Fermani, and Barry Theal for their ideas and thoughts on this detail.
I got an email from the owner and said his Audi had some mold. I have done some light mold work before and wasn't too worried about it :cool1: I decided to go check out the car to put together a more exact estimate. This Audi had a leak coming from the firewall, causing the drivers side floor to be soaked. It was put away in a garage for about 4 months or so for the winter.
So what does 4 months of wet car interior look like...:sick1:
After some discussion, and research, I decided to use an Enzyme Mold Cleaner called sporicidin. I knew this would be a two day project. I suited up, using a mask, gloves, long sleeve shirt tucked into the glove, and some old pants. I was going to throw away everything I was wearing so I looked like pretty silly
I diluted it in a bucket, and in a spray bottle. Not wanting the mold to get airborne I sprayed everything down with the sporicidin mixture and let it sit for a few minutes. Even after just spraying I saw a huge improvement. I was concerned about pitting on the leather but fortunately the mold wasn't on there long enough to pit the leather. I then continued to go over the entire interior with towels from the buckets rinsing after about every square foot or so, I wanted to remove it not spread it around.
Even though I was using the sporicidin I decided to break out the steamer to assist in the mold killing. I have a Polti 2085 steamer that is absolutely amazing at producing steam, I don't know what I would have done without it. I steamed the carpets and lightly hit the seams of the leather. The air ducts were steamed also.
