Search results

I through on a coat of Collinite 845 since i really needed something on my new truck badly for winter. I then a week or so later put on coat number 2 and it really stepped up the looks of it. (yes all subject to everyones eye's) it beads and sheds water like a ducks back . I have maintained...

I feel spray waxes are the way of the future. You put wax on thin anyway and you do the same with a spray wax that usually does not stain trim and thats very fast an economical to use. The durability has come a long way , but still has a long way to go IMO. ( maybe I'm wrong since I have used a...

I bought a new Toyota 4Runner. It's a dark metallic color called Magnetic Gray and because I have the off road package it has what I consider a lot of grained trim. I have it cleaned , and clayed already. I don't have a polish or a 1 step on it but was thinking of a few layers of 845 since...

Good day everyone, First off I like to use product lines . I don't mix and match stuff to much with that being said . I purchased a new vehicle and it has A LOT of grained trim , bumpers , ect.... on it . It is a 11 Toyota 4Runner off road edition (thats why all the grained trim instead of...

I have both 845 and 476. I have for the first time since I had this stuff (for a year) tried the 845 last night . Previously I had 476 on . I DG polish and added a coat of 845 a week later . I like the ease of use and the shine for my DD . (med.met.gray 4runner). I did use a PC with a megs...

I did my 06 metallic gray 4Runner with 501 followed by 601 followed by 105. I like DG stuff alot , but there is something missing . It shines and has a wet look but just not right. Last year I put 2 coats of 476s on my vehicle and seriously it lasted for a good 8 month during the winter and...

Was wondering what the best way to go is ?? I have done the 601/105 before and it came out very nice , but since I have been absent for quite some time I wondered if anyone has done the 501/105 with any different results ?? The vehicle is a med. metallic mica gray Toyota Have you noticed...

Why do so many use 845 over the 476. I have both products but last fall I used the 476 X2 for winter and it held up fantastic and kind of gave the look over FK 1000P but lasted much longer . It was a glossy thick look . I am ready to wax again and am a little confused over which one would...

Is this best applied by hand or pc ? Will it leave a white residue behind or stain trim ? I currently have 2 coats of 976 on all winter and its held up fantastic but I'm sure it's starting to diminish as it's been through many washes , but still beads and shines very nice.. Just feel...

Is there anything else I should get besides 845 thats worth trying ??

Anyone have a durability comparison ??? Both are synthetic engineered products (wax/sealant) type. Thank you

I am almost out of 1000P been extremely happy with the look , and durability , I don't like the drying white and shows every spot ya missed but thats my problem ....lol. Harsh Wi. winter is on it's was and was wondering about a switch to IW845 or another one of there products that may give...

I've been using M21 2.0 , what could I expect switching to the #20 polymer sealant as far as looks , durability .

I have not used this product yet , what can I expect the difference to be over the M21 2.0 I know one is a synthetic sealant with hydrophobia and the other is a polymer sealant . Is one darker , wetter , more durable , better shine , ???? Thank you

What is the difference if I use MW followed by CMW vs RMG/VM mixture or separate followed CMW ?? Where does the Yellow cream wax fit in ?? How long before layers of CMW ?

I want to strip my old stuff off my personal vehicle and I will start with a Dawn wash. What is a good ratio to use per gallon ??

like compared to an FK1000p or other's . I've bought into alot of hype here on certain products and granted everyones taste is different , just don't want to waste the money for Prewax cleaner and IW845.

I did a 3 step with M21 v2.0 being last and have done 3 coats/layers , it looks awesome . So tonight I was going to an event and grabbed my bottle of ONR mixed as a qd which I have done several times lately , It comes out looking awesome , now why can I just leave it the phuk alone and be happy...

Ok after playing with ONR and finding the right methods for me I am very happy with the product. Poli-Seal - I can't get this to do anything special , I've tried lot of product , little product , pol pads , fin pads , and still very average. (using pc on anywhere from 3-6). OCW - same deal...

I want to order an extractor for car's but it would not be a bad thing if I had a house carpet attachment. Can you give me some suggestions please on anything new/updated that my searches might have missed. Thank you Mike