Search results

Painted a set of wheels for a friend of mine. Damaged paint Damaged paint sanded off and cleaned. Ready for some epoxy. Epoxy Primer/Sealer Silver Basecoat Clearcoat And the finished product

Before: After:

Little bit of paint work/detail I finished up today. Used: House of Kolor KD3000 primer/sealer Sherwin Williams ATX Basecoat Sherwin Williams Clearcoat Denibbed with 3m 1500 dry followed by 3000 wet Buffed with LC Orange Pad with 3D AAT Polished with LC Blue pad with 3D Polish Meguiars on...

A friend of mine from Jacksonville is having a truck built in Texas right now. They are in the process of building the new frame and doing the air ride, body drop and possibly a sheet metal dash. I should be getting it within the next 3 months I am thinking. You never know about some of these...

New bumper House of Kolor KD3000 sealer Dupont Chromabase Basecoat Sherwin Williams Clearcoat Busted HID headlight $1025 Denibbed with 3m Trizact 1500, 3000, Buffed with 3D Wool Pad with AAT followed by orange pad followed by white pad with HD Polish

So here are some shots of the damage on the front end. I think she was going 5 mph max. Totals came up to $5,700. Replaced hood, both fenders, both headlights, ac compressor, radiator support, bumper bracket, bumper, cowl, air dam undercarriage and misc pieces. New panels had some dents...

I've emailed 3D a couple of times in the past few days but haven't gotten a response. They web page says they answer within 24 hours. Is there a rep here that I could talk to about this? If so please send me a PM

I have been using HD Cut but noticed they have an AAT out now. Is it worth the price difference?

I've been using HD Cut and need to re-order. Is the AAT compound a better choice than the HD Cut? Obviously it costs a bit more. I plan to order a gallon so it should last me a long time.

I only took a few pictures of the before to show the moderate swirling going on. -ONR Wash -HD cut on HD Wool Pad rotary -HD Poiish on white pad rotary -Opti Seal on paint

Someone with buffing experience

Obviously this was more than just a detail but there was sanding and buffing. I used HD Cut on a meguiars wool pad and lc orange pad for cutting and HD Polish on a white pad for polishing. House of Kolor KD3000 DTS Primer/Sealer: Guide Coat before blocking: House of...

Another job for a neighbor. Painted and installed front and rear bumpers as well as changed out body moulding from painted to black. Wet sanded the whole car (Except for top and hood as they actually need paint). -Sanded with 3m Trizact 1500 on da sander -Sanded with 3m Trizact 3000 on da sander...

This one came in really nasty but cleaned up well. I ended up having to buff the whole car because it had stains that a polish on the rotary wouldn't touch. It appeared that some kind of chemical was spilled on the trunk/quarter panels on both sides that really deadened the paint. Other than...

-Dawn Wash -Mothers Clay bar with Griot's Garage Detail Spray -Optimum No Rinse Wash & Shine Wash -HD Cut Compound via Meguiars Wool Pad and HD Yellow Pad on rotary -HD Polish via HD White Pad on rotary -Optimun No Rinse Wash & Shine Wash -Optimum Opti Seal -Meguiar's Hot Shine Tire Dressing -...

Pictures aren't the greatest but they are all I have.   Dawn Wash Clay Bar HD Cut via rotary and Meguiars wool pad HD Polish via rotary and lc white pad Opti Seal OCW Opti Gloss coat on wheels Meguiars tire shine on tires and plastic trim Armour All on interior plastic...

If I apply optiseal how long do I need to wait before applying ocw?

Got around to painting calipers and rotors. I replaced them about 2 months ago and had the intention of doing it before I put them on but I didn't. Wish I had now cause they got rather rusty. Used a wire brush and brake cleaner to remove rust.   Also polished a few headlights a few...

I'm about tp purchase new leather for my truck and looking for some good leather products to keep around the house. Also something to use on old worn leather in case I do a detail.

I've finally gotten started working on my truck again. My initial plan was to go with a simple solid color but that changed. I figured if I wanted some more side work it would be beneficial to have something kinda flashy that would catch the eye and possibly start a conversation. I have some...