Recent content by kimwallace

Just finished trying the new and improved Poorboys' SSR-2 and have to completely agree with IMPROVED. This has been one of my go to polishes for years with the PC, but could never get it to perform well with the rotary because it seemed to lack the lubrication properties needed and would dry out...

I had the opportunity to try out some of Adams Detailig products ... see this thread: http://www.detailcity.com/showthread.php?t=8145&highlight=Adams+Kit+review After 8 weeks, at least 3 snow storms and the salt, dirt, brine and everything else that comes with them plus 3 or 4 washes and 2 or 3...

After reading rave reviews, I decided to try this product on the tan top of my wife's Z-3. The directions on both the cleaner and the protectant are clear and easy to follow. The cleaner comes in a trigger spray bottle and is sprayed on the top, worked in with a soft brush, and then rinsed off...

I am sure this is somewhere but I searched and searched and could not find an answer. I have posted pictures to threads using the "Attach Files" option. 1. Is there a better way? If so, please explain it step by step. 2. How do you add text prior to, and after the picture? 3. Maybe the answers...

Restoring a Scratched Headlight Before I learned how to repair the plastic headlights on todays vehicles, I had one replaced. Before I tried to sell the original one, I thought I would repair it and take a couple pictures of the process. Picture 1 shows the scratched headlight. Picture 2 shows...

Adam’s Polishes … Detail Kit, Review Included in Kit: 1-16oz bottle detailing spray, 1-12 oz bottle of V.R.T. ( Vinyl, Rubber, & Tire Protectant), 1-12 oz bottle of Revive Polish, 1-12 oz bottle Butter Wax, 2-Microfiber Towels, 2-Microfiber applicators, and 1-Detail Sponge. Packaging: All...

I have used two different Edge 2000 Pads Designed for the DA (PC): The Yellow Medium Cut Pad and the Blue Polishing Pad Both pads are double sided and are packaged in a heavy duty plastic bag. The first thing I noticed was that the balance of the PC was different. It was a little harder to keep...

Clay is a great tool to help achieve the best paint finish possible. It can however create additional problems if not used carefully. Clay is used to remove the embedded contaminates in paint that cannot be removed by washing or polishing alone. In my opinion when clay is used to remove tar...

A while back I posted about some deck cleaner with bleach getting spilled on the carpet of my car. After hitting all of the detail shops in the area and many sites on the internet to find carpet dye, I found that mine was a color that just wasn't available as a factory mix. I called Dwayne at...

After trying most of the bug remover products out there with limited success ... many of them take off the bugs but also remove the wax too ... I tried this and it works great and leaves the paint with that just waxed feel. - Spray Poorboys S&W on the bugs and let sit for a few minutes. - While...

I had a new container of deck cleaner on the floor of the car and the lid wasn't tight ... long story, short. It tipped and bleached out the color of the carpet. Where can I buy dye to recolor the carpet???

What is the difference between Poorboy's Pro Polish and the SSR Products. I have used SSR 3 and SSR 2 to remove scratches and and then SSR 1 to final polish to an amazing shine. So, my question is, "Where does PP fit into the mix and why?

After washing and claying a car, I used SSR-2 and then SSR-1 and couldn't believe the awesome shine and reflectivity to the finish. Since I was topping with UPP, I decided to try what has been recommended here so I started to apply a coat of AIO ... I followed the directions and what I found was...

I have finally found a leather cleaner and a conditioner that works as advertized. 4* Ultimate leather Cleaner and 4* Ultimate Leather Conditioner The Cleaner, -Is a clear gel that rubs in extremely well -The instructions say to wipe off to dry and as I did that it removed the dirt. - The...

This question was asked in another thread but I think it deserves more attention ... How dirty is too dirty to use Spray and Wipe ... second part ... After spraying it on how do you recommend removing??