BBQ some tri-tips. Might check out a low key fireworks show here in irvine. Enjoying not working. Will probably do 22ple coating on at least one more wheel. Did one today. Process took about 3 hours. Jack up car, take wheel off. Clean wheel and barrel with Meg's wheel brightened, followed by degreaser to neutralize acid of wheel bright. Wash with mr pink. Wet wheel, spray with trix, agitate lightly with foam applicator. Rinse thoroughly, wash again with mr pink. Spray down with ONR as clay lube, clay wheel with medium clay, rinse. Dry wheel, go over full wheel with IPA. Apply coating with foam applicator on barrels, wait 5 min, lightly wipe with MF. Apply coating to front of wheel with foam paint applicators, wait 5 min, lightly wipe off high spots with MF. Put wheel back on, torque to spec. Wait 6 hours, apply 2nd light coat of coating with new foam paint applicator, buff after 5 min.
See what a PITA this is? And I actually enjoyed the process. This is what the detailing hobby does to you. Ha.