My wetsanding project with PICTURES!

[The Gloss Boss]

So I`ve decided to learn wetsanding. After being bored with just reading about it I decided to go to my local auto parts store and buy some sanding paper. I purchased 1000, 1500, 2000, 3000 grit 3M wet/dry papers and a 3M sanding block. Yesterday I recieved a package that included some OPT wool pads, 3M Rubbing Compound, and PBW SSR2.5 among other things. Today I planned on just doing a section of my car to get a feel for the whole thing and find out what grit would flatten my orange peel the best. This ended up being my process:

-Paint was levelled with 1500 grit 3M wet/dry sand paper.

-Sanding scratches were cut out with 3M rubbing compound/rotary buffer/optimum wool pad.

-Compounding swirls were removed with Poorboy`s SSR2.5/rotary buffer/orange lake country light cutting pad.

-Haze from first buffing step was cleared up with Poorboy`s SSR1/rotary buffer/black lake country finishing pad.

-The result: clear, crisp reflections!

Enough talking, here are the before and after pics.

Thanks for looking

[C. Charles Hahn]

Excellent results! Was that factory paint? If so I hope you`ve got a PTG to check how much paint you`re removing.

[mrclean81]

Wow that turned out great

[The Gloss Boss]

Excellent results! Was that factory paint? If so I hope you`ve got a PTG to check how much paint you`re removing.

Yes it`s factory paint. It`s my own car so I`m not too concerned about removing too much CC. However, until I do purchase a PTG I will limit my retail job sanding to fixing scratches.

[The Gloss Boss]

Wow that turned out great

Thanks buddy. I hope Mark will have some work for me this week. I`ve been lazy and haven`t done too much hustlin` this past week, lol.

[mrclean81]

The bosses were in Michigan all week on vacation. They will be trying to push a lot of trucks through this week now that they are back so I`ll put the word in for you.

[The Gloss Boss]

Well he told me before the holiday to come by or call this Monday so there should be something. Sounds like I could be busy then. I need some $$$, haha.

[GearHead_1]

There is no doubt that the reflection in the finished picture is much crisper and clearer. Good job. Did you have fun?

[wallyStang]

Great job!!!! I would recommend some Poorboys Pro Polish with a porter cable and a finishing pad to finesse that finish

[The Gloss Boss]

There is no doubt that the reflection in the finished picture is much crisper and clearer. Good job. Did you have fun?

Thank you sir! Yes, I did have fun. I enjoy expanding my knowledge and experience with things I`m passionate about.

[The Gloss Boss]

Great job!!!! I would recommend some Poorboys Pro Polish with a porter cable and a finishing pad to finesse that finish

Thanks man! Poorboy`s does make some dang good polishes. I`ll have to add that to my list of products to try. It appears to be pretty versatile.

[Addicted2Bling]

Looks like you really took your time a did a good job, check out this thread I found, I don`t know if you`ve seen it yet...

http://www.autopiaforums.com/forums/...ang-twins.html

[The Gloss Boss]

Thanks for the link. That was insanely thorough, but I wouldn`t expect anything less from Mike Phillips.

[The Gloss Boss]

I`m wanting to try machine sanding and was wondering what speed to set a PC at to do so. My guess would be 3 or 4. I feel like any faster would be overkill...I could be wrong.

[Rocket]

Great job. I want to do a little on my car but I`m too scared