Wax application

**TortoiseAWD** · 11-20-2001, 04:36 PM

My SVX has something of a unique paint protector/filler cap holder built in . . . hard for me to describe, but I`ll try to take a couple of pics to post.

Tort

**Don2000g** · 11-25-2001, 11:54 PM

Instead of worrying about using up any towels when you fill up, you could also use paper towels and/or newspaper. Laters

**Langley Interior Car Kare** · 11-26-2001, 01:54 AM

thats the gas card that they give me...nothing special...but they have those little towels thingys there...above the swiper gizmo that i never go near....

**RonPirate** · 05-22-2010, 07:58 AM

Hey Guys.....

Some what familiar with the basic processes......... but I got to thinking about the application of Wax/sealant. Wanted to get some opinions of using Machine versus Hand on applying wax/sealant. My thinking is I have clayed,polished with machine. and may have layed down a glaze with machine.... now final step.... use a machine with wax or just apply by hand.... any advice or opinions...........pro/cons..... Thanks much

Ron

**imported_Sal329** · 05-22-2010, 01:56 PM

I apply both ways, depends on the product. Paste I always apply by hand just find it easier. Liquids I apply either way.

**imported_Flash Gordon** · 05-22-2010, 02:03 PM

Originally Posted by RonPirate

Hey Guys.....

Some what familiar with the basic processes......... but I got to thinking about the application of Wax/sealant. Wanted to get some opinions of using Machine versus Hand on applying wax/sealant. My thinking is I have clayed,polished with machine. and may have layed down a glaze with machine.... now final step.... use a machine with wax or just apply by hand.... any advice or opinions...........pro/cons..... Thanks much

Ron

Arrrrgh RonPirate. I usually use a paste for my lsp. So by hand must be preferred method :blacksmith:

**bmw5541** · 05-22-2010, 02:18 PM

RonPirate,

Either way will do just fine. There is no real advantage to applying a wax or sealant by machine other then getting a more evan coverage. There is no need to work in the product, so use whatever method you feel more comfortable with.