Results 1 to 13 of 13
  1. #1
    William_Wallace's Avatar
    Join Date
    Jun 2017
    Posts
    892
    Post Thanks / Like

    Nu-Finish Ceramic

    $14 for 24oz, rubbing alcohol scented , cheap and streaky just like I like my products!

    Its definitely a cool to play with product and if over applied streaks the best way to describe is since there’s a lot of alcohol in it the evaporation is quick and it’s leaving some type of solid. Weather it’s resin or other product like silicone not SIO2 I have no Idea but what it left when I sprayed on a mirror and let air dry was clear and hard to remove. I use wowo crystal seal which is silicone based or IGL which is silicone based for my spray sealant it would be cool to test against those. I’m glad they they made this because the other nu finish was not for me
    Attached Images Attached Images
    Likes Stokdgs liked this post

  2. #2

    Join Date
    Apr 2011
    Location
    New Jersey
    Posts
    13,224
    Post Thanks / Like

    Re: Nu-Finish Ceramic

    I think I know why you had a problem with streaking...you`re holding the bottle sideways. At least that`s my analysis.
    Thanks roscopervis thanked for this post

  3. #3

    Join Date
    Mar 2014
    Posts
    44
    Post Thanks / Like

    Re: Nu-Finish Ceramic

    Quote Originally Posted by Setec Astronomy View Post
    I think I know why you had a problem with streaking...you`re holding the bottle sideways. At least that`s my analysis.
    That and he "lives in a van down by the river!"
    Likes Stokdgs, William_Wallace, wannafbody liked this post

  4. #4
    dansautodetailing.com Stokdgs's Avatar
    Join Date
    Apr 2009
    Location
    NorCal.. Avatar = Swan Lake, Hallstatt, Austria
    Posts
    5,189
    Post Thanks / Like

    Re: Nu-Finish Ceramic

    Quote Originally Posted by Setec Astronomy View Post
    I think I know why you had a problem with streaking...you`re holding the bottle sideways. At least that`s my analysis.
    Likes William_Wallace liked this post

  5. #5
    William_Wallace's Avatar
    Join Date
    Jun 2017
    Posts
    892
    Post Thanks / Like

    Re: Nu-Finish Ceramic

    That is hilarious!
    Likes Stokdgs, jem7sk liked this post

  6. #6

    Join Date
    Apr 2011
    Location
    New Jersey
    Posts
    13,224
    Post Thanks / Like

    Re: Nu-Finish Ceramic

    Quote Originally Posted by William_Wallace View Post
    That is hilarious!
    Eh...you haven`t been a member here long enough...that sideways picture gag is an old one...you know, car stuck to the wall, etc. (makes it easier to polish the roof!)
    Likes William_Wallace liked this post

  7. #7
    William_Wallace's Avatar
    Join Date
    Jun 2017
    Posts
    892
    Post Thanks / Like

    Re: Nu-Finish Ceramic

    I also picked up the big blaster sprayer And they were cheap too and so far lived up to the name sake
    Likes BudgetPlan1 liked this post

  8. #8
    acuRAS82's Avatar
    Join Date
    Aug 2017
    Location
    Pittsburgh, PA
    Posts
    1,143
    Post Thanks / Like

    Re: Nu-Finish Ceramic

    This must be the first NuFinish protection product to come out in 40+ years. Why not, right? Maybe it lasts through as many washes as traditional NuFinish without having to hire a lumberjack to buff off.
    Likes William_Wallace liked this post

  9. #9

    Join Date
    Apr 2011
    Location
    New Jersey
    Posts
    13,224
    Post Thanks / Like

    Re: Nu-Finish Ceramic

    Quote Originally Posted by acuRAS82 View Post
    This must be the first NuFinish protection product to come out in 40+ years. Why not, right? Maybe it lasts through as many washes as traditional NuFinish without having to hire a lumberjack to buff off.
    You`d better sell that idea to The Discovery Channel before someone beats you to it.
    Likes acuRAS82 liked this post

  10. #10
    Older's Avatar
    Join Date
    Jun 2018
    Posts
    456
    Post Thanks / Like

    Re: Nu-Finish Ceramic

    Did you try it on a hood in a junk-yard?
    Likes wannafbody, William_Wallace liked this post

  11. #11
    William_Wallace's Avatar
    Join Date
    Jun 2017
    Posts
    892
    Post Thanks / Like

    Re: Nu-Finish Ceramic

    I used it on a few cars I take back the streaking comments it really doesn’t streak it must have just been a bad go the first time right when I got it. Here beading shots the car was not polished just a really good scrub, clay bar, tar removed and Megs decon/iron remover. It’s actually a very easy to use product with all the alcohol it flashes nice and kinda preps the surface for you. Beads are average.
    Attached Images Attached Images

  12. #12

    Join Date
    Nov 2021
    Location
    Ottawa!!! Cool town, hoo yea!!
    Posts
    244
    Post Thanks / Like

    Re: Nu-Finish Ceramic

    Kinda cool to see every brand making new products. Like I say to people, there is sooo sooo many choices today. And for the most part, any thing you reach for will be good and go up from there. There are so many vehicles on the road that only get waxed or coated regularly in rain and dirt, if they get to hit an automatic car wash a few times a year it`s about it. Nice to see so much choice, also makes all the manufacturers have to step the products up. Not to stray off topic too much, but we all know NuFinish has been around a long time, anyone here remember the version they had `Big Finish`?
    Big Finish, heavy duty polish for sports utility vehicles, vans, and trucks. Twice as tough! Twice as thick!
    Thats off the bottle front. Also about twice as potent a smell, very very strong, lol. Was the same bottle as regular Nufinsh but black instead of orange. Would have been around 1998ish. They are actually under a big umbrella nowadays, Energizer ownes it, Armor All, Eagle One and alot of others.
    Likes dgage liked this post

  13. #13
    Dan's Avatar
    Join Date
    Aug 2006
    Location
    NoVA
    Posts
    7,492
    Post Thanks / Like

    Re: Nu-Finish Ceramic

    I picked some up a while ago. It does stink. I had similar results, a bit of streaking or high spots but nothing another spritz didn`t fix. Beading is non remarkable and I can`t vouch for durability yet.
    Likes tom p., William_Wallace liked this post

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Nu Finish Ceramic
    By wannafbody in forum Car Detailing Product Discussion
    Replies: 1
    Last Post: 03-18-2021, 09:54 PM
  2. Replies: 26
    Last Post: 07-23-2017, 07:01 PM
  3. PRODUCT REVIEW: Wolfgang Uber Ceramic Coating/Perfekt finish paint prep
    By Justins00ss in forum Detailing Product Reviews
    Replies: 19
    Last Post: 10-31-2015, 05:55 AM
  4. Replies: 3
    Last Post: 04-10-2015, 05:48 PM
  5. Deep finish OR a Bright glassy finish
    By jlineman in forum Waxes, Sealants, and LSP's
    Replies: 9
    Last Post: 01-04-2013, 08:05 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •