Results 1 to 3 of 3
  1. #1

    Join Date
    Mar 2017
    Posts
    26
    Post Thanks / Like

    Recoat c quartz uk

    I have a coat on and been using reload

    I want to put one more coat on. Can I just coat over everything or take eraser to it and the coat again?




    Sent from my iPhone using Tapatalk

  2. #2
    Mike The Guz's Avatar
    Join Date
    Oct 2013
    Location
    Lawndale, CA
    Posts
    3,757
    Post Thanks / Like

    Re: Recoat c quartz uk

    I pulled this from the Gliss product page at CarPro. Same concept to strip Reload to recoat with another layer of UK. Keep in mind that you only need to wait 45-min to 1 hour if you choose to top with Reload again.

    Q. My coating is a few months old and I want to apply Gliss but Reload has already been applied over the coating, can I still use Gliss?
    A. No, as Reload will not allow the coating to bond to the paint but if you still want to apply Gliss than the process would be as follows:

    1. Wash with CarPro Reset
    2. Decontaminate with Iron X if necessary
    3. Use CarPro Tar X (this will pull the oils out of Reload that will prevent Gliss from bonding. Use in shade, do not allow to dwell, and be careful around sensitive plastics)
    4. a. Spray and wipe in Tar X into panel with microfiber and immediately neutralize the Tar X by either rewashing the panel or using a waterless wash such as CarPro Ech2o (Make sure to neutralize Tar X before moving onto next panel)
    5. Give it one more good wash with CarPro Reset
    6. Wipe down with CarPro Eraser
    7. Gliss application *If applying over an old coating there is a possibility Gliss may haze up the next day and you can see the application marks. If this happens wiping down the vehicle with CarPro Ech2o or a damp microfiber will remove it.*
    8. If you choose to apply Reload over Gliss than you must wait a minimum of 12 hrs to allow Gliss to cure.
    Competition Ready Team 1929 Bentley
    1999 Silvermist Metallic Pontiac Grand Prix GT
    2002 Arctic White Chevy Camaro SS
    Likes Stokdgs liked this post
    Thanks Stokdgs thanked for this post

  3. #3

    Join Date
    Mar 2017
    Posts
    26
    Post Thanks / Like

    Re: Recoat c quartz uk

    Lol wow what a pain in the ass




    Sent from my iPhone using Tapatalk
    Likes Stokdgs liked this post
    Thanks Stokdgs thanked for this post

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. C quartz uk questions
    By Us1champ in forum Waxes, Sealants, and LSP's
    Replies: 12
    Last Post: 03-18-2018, 08:54 AM
  2. Time to recoat with Opti 2.0; Walter Duane Robinson says:
    By Rob4092xx in forum Car Detailing
    Replies: 13
    Last Post: 09-02-2013, 04:19 AM
  3. Ferrari 599 with c quartz
    By Mike lambert in forum The Detailers Showcase
    Replies: 21
    Last Post: 06-09-2013, 07:31 PM
  4. BMW 650 with c quartz finest
    By Mike lambert in forum The Detailers Showcase
    Replies: 3
    Last Post: 04-23-2013, 07:29 PM
  5. 6 mo C-quartz update
    By imported_OverTimeDetail in forum Click & Brag -The Detailers Showcase
    Replies: 0
    Last Post: 02-26-2012, 11:56 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •