McKee`s 37 Hydro Blue Sio2 Coating

[Nick@McKees37]

Yeah I know, I think I over applied

Nanoskin glide.... Didn`t wash it, just rinsed.. maybe this?

That`s one of the culprits.

Tips:
1. Work ONE panel at a time.
2. Hold the bottle of Hydro Blue in ONE hand, and the hose nozzle in the OTHER hand. Spray, and IMMEDIATELY rinse off.

I found the out the hard way do not apply in direct sun it will leave stains I figure it dries to quick.

Speaking from my experience with the stuff, It will streak if used on too hot a surface, used too much, or didn`t wash off clay lube / etc..

Applying this stuff in a kwazar is not needed - way too much product. two or three sprays per panel tops, then immediately rinse off.

Refer to tip #2.

Hydro Blue is applied to my personal vehicles every other weekend, in the direct Florida sun, with no issues. Once you incorporate tips #1 and #2, it`s smooth sailing.

Thanks for the support guys.

[Ronkh]

<---- Never had problem either

Hydro Blue is applied to my personal vehicles every other weekend, in the direct Florida sun, with no issues. Once you incorporate tips #1 and #2, it`s smooth sailing.

.

[Metalvolvo]

That`s one of the culprits.

Tips:
1. Work ONE panel at a time.
2. Hold the bottle of Hydro Blue in ONE hand, and the hose nozzle in the OTHER hand. Spray, and IMMEDIATELY rinse off.





Refer to tip #2.

Hydro Blue is applied to my personal vehicles every other weekend, in the direct Florida sun, with no issues. Once you incorporate tips #1 and #2, it`s smooth sailing.

Thanks for the support guys.

Am I missing something? Or just doing something really wrong?.. I just did the first wash since adding blue and it was amazing the water bead. But onces I added soap and washed it off no more bead. Did my soap strip it off?

[The Guz]

Am I missing something? Or just doing something really wrong?.. I just did the first wash since adding blue and it was amazing the water bead. But onces I added soap and washed it off no more bead. Did my soap strip it off?

What soap did you use?

[Metalvolvo]

Nanoskin Cherry Suds

[Metalvolvo]

What soap did you use?

Nanoskin Cherry Suds

[The Guz]

Nanoskin Cherry Suds

I doubt you stripped it off. Some soaps that contain waxes or gloss enhancers can mask the properties of an LSP. I am not sure about the one you posted as I am not familiar with it.