Results 1 to 11 of 11
  1. #1
    512detail's Avatar
    Join Date
    May 2013
    Location
    Kyle, Tx
    Posts
    8,067
    Post Thanks / Like

    How about CSL+EXOv3+EXOv2

    I have a few bottles I need to get rid of before they go bad...so I was thinking

    CSL+ EXO v3 and then EXO v2

    am I just crazy? I think I`m gonna at least try this on a fender

    definitely not practical for customers or anything like that but I love me some experimentation and the car is up for a good washing and I am getting tired of looking at the marring on the passenger side, time to polish it and since the clear is pretty thin I`m gonna go ahead and coat it with something

    either Cosmic v2
    or some GTECH cocktail

    thoughts?


    Brandt K.
    Likes trashmanssd, nickclark08 liked this post

  2. #2
    RaydiantDetail's Avatar
    Join Date
    Mar 2016
    Location
    Atlanta
    Posts
    535
    Post Thanks / Like

    Re: How about CSL+EXOv3+EXOv2

    Do it!
    Mr. Mad Scientist lol
    Likes 512detail liked this post

  3. #3
    kevincwelch's Avatar
    Join Date
    Jul 2013
    Posts
    450
    Post Thanks / Like

    Re: How about CSL+EXOv3+EXOv2

    Crazy like a fox!

    Let`s see it!

    Perfection is attained by slow degrees; it requires the hand of time. (Voltaire)
    2013 TESLA MODEL S | 2015 Toyota Highlander
    Likes 512detail liked this post

  4. #4
    512detail's Avatar
    Join Date
    May 2013
    Location
    Kyle, Tx
    Posts
    8,067
    Post Thanks / Like

    Re: How about CSL+EXOv3+EXOv2

    ok so how about the logistics


    I know I can top CSL with EXOv3 almost immediately...but should I wait a day or two to top with the EXOv2 ? car is gonna be in the garage for several days as it is raining all week and into the weekend and I work from home so it`s not going anywhere


    Brandt K.

  5. #5
    512detail's Avatar
    Join Date
    May 2013
    Location
    Kyle, Tx
    Posts
    8,067
    Post Thanks / Like

    Re: How about CSL+EXOv3+EXOv2

    I have CSL+EXOv3 against CSL+EXOv2 and I like certain things about both of them so I decided I`d like to try this to see if I can have my (shine) cake and eat it too. hahahaha


    Brandt K.
    Likes trashmanssd liked this post

  6. #6

    Join Date
    Apr 2016
    Location
    SWFL
    Posts
    293
    Post Thanks / Like

    Re: How about CSL+EXOv3+EXOv2

    On their site there is only a time limit on the EXO being applied over the CSL it doesn`t say anything about EXO coats requiring any length in between


    Sent from my iPhone using Tapatalk
    Likes 512detail liked this post

  7. #7
    trashmanssd's Avatar
    Join Date
    May 2014
    Location
    Plymouth,Ma
    Posts
    1,772
    Post Thanks / Like

    Re: How about CSL+EXOv3+EXOv2

    CSL cocktail, I love your reviews on them.
    Likes 512detail liked this post

  8. #8
    kevincwelch's Avatar
    Join Date
    Jul 2013
    Posts
    450
    Post Thanks / Like

    Re: How about CSL+EXOv3+EXOv2

    Shouldn`t be a problem applying exo on exo at whatever time. Here`s an email I sent to Rob at Gtechniq a couple of years ago:

    Hi Kevin,

    No problem at all.` I would recommend prepping the surface with Panel wipe prior to application to get the best bond.

    Rob

    From:`Kevin C. Welch [mailto:]`
    Sent:`20 January 2014 00:48
    To:`Robert Earle
    Subject:`RE: delayed EXO v2 application

    Rob,

    How much of problem would it be to apply exov2 over exov2 applied 6m prior as sort of a maintenance coating?
    (Sent via my mobile device...)

    Perfection is attained by slow degrees; it requires the hand of time. (Voltaire)
    2013 TESLA MODEL S | 2015 Toyota Highlander
    Likes CerceS550, 512detail liked this post

  9. #9
    Wax Waster Ronkh's Avatar
    Join Date
    Mar 2008
    Location
    SwFL
    Posts
    25,831
    Post Thanks / Like

    Re: How about CSL+EXOv3+EXOv2

    We know you`re crazy, but what does that have to do with anything??

    Do it!
    Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!
    Likes trashmanssd, 512detail, kevincwelch liked this post

  10. #10
    AspiringProductSpecialist Angus's Avatar
    Join Date
    Mar 2014
    Location
    SE PA
    Posts
    3,471
    Post Thanks / Like

    Re: How about CSL+EXOv3+EXOv2

    Quote Originally Posted by 512detail View Post
    ok so how about the logistics
    I know I can top CSL with EXOv3 almost immediately...but should I wait a day or two to top with the EXOv2 ? car is gonna be in the garage for several days as it is raining all week and into the weekend and I work from home so it`s not going anywhere
    Cool! Looking forward to seeing what you do. From my own CLS + EXO application research Gtechniq recommends apply EXO within a 24hour window after applying CLS.

    If still you have any EXO left over, pls let me know - I may end up needing a small amount to recoat the area I scratched if Essence + doesn`t work > re-polishing is needed.

  11. #11
    512detail's Avatar
    Join Date
    May 2013
    Location
    Kyle, Tx
    Posts
    8,067
    Post Thanks / Like

    Re: How about CSL+EXOv3+EXOv2

    well I was slowly working at the car, got it fully decon`d and clayed and was gonna polish tonight but I have a drop off tomorrow and its supposed to rain so I will need my garage so I am kind disappointed as now I will have to wash and decon again! dangit! and my ocd won`t let me put my potentially naked paint outside even for half the day in the sun so I guess I will put some QD+ or something on there for a days worth of protection


    Brandt K.

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CSL + EXOv3 water behavior testing part1
    By 512detail in forum Detailing Product Reviews
    Replies: 14
    Last Post: 05-18-2017, 08:24 PM
  2. CSL + EXOv3 or System X
    By cvette04 in forum Car Detailing Product Discussion
    Replies: 1
    Last Post: 03-05-2017, 11:03 AM
  3. Csl bs exov3
    By Dwhite0960 in forum Waxes, Sealants, and LSP's
    Replies: 18
    Last Post: 01-27-2017, 06:10 AM
  4. EXOv2 beading and sheeting
    By VaderGT in forum Waxes, Sealants, and LSP's
    Replies: 12
    Last Post: 09-26-2013, 12:36 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •