Help- Reload Streaks

[Loach]

I`ve worked with Reload v2015, and what works for me is just a quick wash and rinse with a regular car wash soap. Reload is not something that likes to flash 100% off of the paint, you can see during removal with the microfiber and a light source there`s still that faint amount left behind. When I do a quick wash and rinse with soap, after checking with a light the residuals are gone. Let me know if that works in your situation.

Edit: Just saw your post Ronkh, I`ll have to get the Reload out and do some more testing with it.

[512detail]

Didn`t work for me, as well as reset 4x the recommended amount, nor straight apc

Don`t remember if I tried the additional reload, but think I did

Well Ron I`m hoping I have better luck but something tells me I wont if you didn`t.

[512detail]

what if i do the lighter test? lol

kidding

[Ronkh]

Well Ron I`m hoping I have better luck but something tells me I wont if you didn`t.

I tried so many different things it`s crazy.

Seriously think about letting it wear naturally.

[Ronkh]

what if i do the lighter test? lol

kidding

make sure you have the right brand of lighter

[512detail]

strike anywhere, right?

[Ronkh]

strike anywhere, right?

Read the directions, or it could be user error

[Ronkh]

Here was corey`s answer to me....

Hi Ronkh, Joseph T asked me to pop over and help you out. Reload version your using should have no issues if used as described below.

Note, streaks are either product not buffed off or product re-deposited by a towel with reload in it instead of a proper dry final wipe towel.

With Reload it cures to the paint much stronger than wax so the difference in application is that you need to wipe it off completely before it flashes off on its own.

1. Shake well
2. Spray only the amount needed for one section (not an entire panel)
3.-IMMEDIATELY spread the product out with a short nap Microfiber Towel (high quality though) and immediately buff in completely and off.
4.-IMPORTANT: Use a separate towel (preferably a high quality absorbent towel) This towel is to stay using dry sides throughout as your final wipe towel. With this towel immediately buff the area once more to be sure no streak remains
5.-Move to next section and repeat.

Note, any drops that blow onto other areas of paint may become streaky if left there awhile. As mentioned - one area and move on (not an entire hood) please let me know if this helps.


OK, now onto removing it after it was applied incorrectly. This is the hard part. Reload is VERY durable and your correct its not going to simply be wiped off using IPA or Eraser. Please give me a call and we can walk through what you have available and how we can go about removing the streaks.

High spots from Reload WILL wear off on their own but as I understand it you don`t have time to wait for such things. Give me a ring - 386-259-0759

as I said GOOD LUCK, nothing worked for me

[512detail]

I never said it was the Reload`s fault

total i d 10 t error there

guess my 2nd wipe towel needed a third wipe towel and possibly a fourth wipe towel

[Ronkh]

I never said it was the Reload`s fault

I meant the lighter

[512detail]

perfect timing for lonestart mopar fest this saturday of course

[512detail]

I meant the lighter

i realized that on the second read through

im a little slow sometimes- thats why i like fast cars

[Ronkh]

perfect timing for lonestart mopar fest this saturday of course

Oh yeah. Same as me, in time for the Corvette show at Disney......

[Ronkh]

btw

What the version and date on the bottle

[512detail]

its the send version after the reformulated... i dont have the bottle in hand im at the office until after work

i ordered it about 2 months ago or so

im guessing that makes it v2015 unless there are different "new" formula versions out there