Page 1 of 3 123 LastLast
Results 1 to 15 of 33
  1. #1
    13S550's Avatar
    Join Date
    Feb 2016
    Posts
    31
    Post Thanks / Like

    Pressure Washer questions

    Ive been looking for my first pressure washer. Used the search engine and also been researching online. I`m leaning a little more toward a gas unit but see a lot of people using the electric washers. It will be used primarily for washing my cars but also for around the house IE driveway or pavers. I live in Arizona so won`t be using it for algae or mildew removal.

    Opinions please....

  2. #2
    dansautodetailing.com Stokdgs's Avatar
    Join Date
    Apr 2009
    Location
    NorCal.. Avatar = Swan Lake, Hallstatt, Austria
    Posts
    5,190
    Post Thanks / Like

    Re: Pressure Washer questions

    Electrics are fine while they work.. They will never put out as many gpm as a gas powered unit..

    I watch my neighbor across the street with his little blue electric pressure washer take almost 6 hours to just wash off the gunk in his concrete driveway that my gas powered little 2.0gpm unit can do in a couple of hours and mine is perfectly, evenly clean.. His is all streaky, unevenly clean, misses a lot of gunk removal..

    If your goal is to have a handy little washer that really cant do big things very easily and might die any time, then electric is for you..
    If you dont use it a lot - say for Detailing - then an electric is perfect for smaller jobs, etc..

    If you want a more sturdy pressure washer with more gpm, a bigger, heavier duty pump, one you can put 50+ feet of hose on and do a lot more stuff, then look at gas powered units.. The only maintenance I ever do to mine which is over 10+ years old now, is change the engine oil at least every 2 years, change the air filter, and spark plug whenever I think it needs it..
    It has never broken, it does not use oil, smoke, or fail to work..

    Good Luck with your research !
    Dan F
    Likes 13S550, JustJesus liked this post
    Thanks rlmccarty2000 thanked for this post

  3. #3
    13S550's Avatar
    Join Date
    Feb 2016
    Posts
    31
    Post Thanks / Like

    Re: Pressure Washer questions

    Quote Originally Posted by Stokdgs View Post
    Electrics are fine while they work.. They will never put out as many gpm as a gas powered unit..

    I watch my neighbor across the street with his little blue electric pressure washer take almost 6 hours to just wash off the gunk in his concrete driveway that my gas powered little 2.0gpm unit can do in a couple of hours and mine is perfectly, evenly clean.. His is all streaky, unevenly clean, misses a lot of gunk removal..

    If your goal is to have a handy little washer that really cant do big things very easily and might die any time, then electric is for you..
    If you dont use it a lot - say for Detailing - then an electric is perfect for smaller jobs, etc..

    If you want a more sturdy pressure washer with more gpm, a bigger, heavier duty pump, one you can put 50+ feet of hose on and do a lot more stuff, then look at gas powered units.. The only maintenance I ever do to mine which is over 10+ years old now, is change the engine oil at least every 2 years, change the air filter, and spark plug whenever I think it needs it..
    It has never broken, it does not use oil, smoke, or fail to work..

    Good Luck with your research !
    Dan F
    Thanks!! That`s why I`m leaning toward gas unit. The only thing I`m seeing is that some pumps are not so reliable Axial cam vs triplex plunger. And the cost associated in buying the better pump. Which pump do you have ?

  4. #4
    dansautodetailing.com Stokdgs's Avatar
    Join Date
    Apr 2009
    Location
    NorCal.. Avatar = Swan Lake, Hallstatt, Austria
    Posts
    5,190
    Post Thanks / Like

    Re: Pressure Washer questions

    If the pressure washer is going to be doing multiple projects - washing down the house prior to painting, cleaning all the gunk that gets into concrete driveways that are almost always wet like in the Seattle WA area I used to live in, cleaning engine compartments and the engine, washing out sand out of carpeted floormats on the driveway, washing convertible tops, doing the first clean up- knock down of vehicles, prior to washing by hand, then I know a gas powered unit will last forever if you get a good engine, break it in carefully, change the oil periodically, and basically there is no maintenance on the pump which has it own separate oil..

    I will go back and tell you which pump I have.. Forgot until you reminded me - my pump did start leaking a tiny bit around year-10 and I easily purchased a new one on line and R&R`d it quickly with no issues..

    Since its been 6 years ago, I will have to try to find that file and tell you what pump I have..
    It also has a Briggs & Stratton engine and it has never failed..
    Also have a long wand on it with an adjustable V-type Fan Tip that is absolutely perfect for any kind of work.

    You dont really need a very pointy sharp tip on there unless you want to see how quickly you can wreck things with it..
    The V-shaped Fan Tip is way better, since its wider, it covers more area at a time, harder to accidentally hurt things with it..

    You can always put the Fan Tip closer to things without hurting them if you are careful.
    The sharp point tip will definitely make a hole when its placed closer to anything - hence, why I never use it..

    Dan F
    Likes 13S550 liked this post

  5. #5
    xlr8r's Avatar
    Join Date
    Oct 2015
    Posts
    12
    Post Thanks / Like

    Re: Pressure Washer questions

    I have a Toro gas unit I`ve had for better than 10 years. It has a Honda 5.5 hp motor that starts within 3 pulls even after setting up for a year or better. And it has the axial pump.
    Likes 13S550 liked this post

  6. #6
    Rasky's Auto Detailing RaskyR1's Avatar
    Join Date
    Mar 2009
    Location
    Eden Prairie, MN
    Posts
    5,011
    Post Thanks / Like

    Re: Pressure Washer questions

    I dislike dealing with gas units. While you get more bang for the buck they are noisy, can be a PITA to start, have to be filled with gas, and of course the fumes. Plenty powerful electric units can be purchased but you`ll spend $600+ for one and want to make sure your electric is up to the task. I recently picked up this AR630, 1900psi and 2.1GPM. I also got a different trigger, flexible wand, 50` kink resistant non-marring hose, quick connects, and a few different tips for $716


    (Triplex Pump with ceramic plungers and double packing industrial seals)

    Likes 13S550, The Driver, mnehls86 liked this post

  7. #7
    13S550's Avatar
    Join Date
    Feb 2016
    Posts
    31
    Post Thanks / Like

    Re: Pressure Washer questions

    [QUOTE]
    Quote Originally Posted by Stokdgs View Post
    If the pressure washer is going to be doing multiple projects - washing down the house prior to painting, cleaning all the gunk that gets into concrete driveways that are almost always wet like in the Seattle WA area I used to live in, cleaning engine compartments and the engine, washing out sand out of carpeted floormats on the driveway, washing convertible tops, doing the first clean up- knock down of vehicles, prior to washing by hand, then I know a gas powered unit will last forever if you get a good engine, break it in carefully, change the oil periodically, and basically there is no maintenance on the pump which has it own separate oil..

    I will go back and tell you which pump I have.. Forgot until you reminded me - my pump did start leaking a tiny bit around year-10 and I easily purchased a new one on line and R&R`d it quickly with no issues..

    Since its been 6 years ago, I will have to try to find that file and tell you what pump I have..
    It also has a Briggs & Stratton engine and it has never failed..
    Also have a long wand on it with an adjustable V-type Fan Tip that is absolutely perfect for any kind of work.

    You dont really need a very pointy sharp tip on there unless you want to see how quickly you can wreck things with it..
    The V-shaped Fan Tip is way better, since its wider, it covers more area at a time, harder to accidentally hurt things with it..

    You can always put the Fan Tip closer to things without hurting them if you are careful.
    The sharp point tip will definitely make a hole when its placed closer to anything - hence, why I never use it..

    I`ll be curious to see what pump you have. I think I`m overthinking this pump issue. Like you stated I`m not going to use this washer more than once or twice a week.
    And maybe max of three hours when I clean the drive way or my pavers.

  8. #8
    13S550's Avatar
    Join Date
    Feb 2016
    Posts
    31
    Post Thanks / Like

    Re: Pressure Washer questions

    Quote Originally Posted by xlr8r View Post
    I have a Toro gas unit I`ve had for better than 10 years. It has a Honda 5.5 hp motor that starts within 3 pulls even after setting up for a year or better. And it has the axial pump.
    Thanks, I`m glad to see another vote for the Axial pump...

  9. #9
    13S550's Avatar
    Join Date
    Feb 2016
    Posts
    31
    Post Thanks / Like

    Re: Pressure Washer questions

    Quote Originally Posted by RaskyR1 View Post
    I dislike dealing with gas units. While you get more bang for the buck they are noisy, can be a PITA to start, have to be filled with gas, and of course the fumes. Plenty powerful electric units can be purchased but you`ll spend $600+ for one and want to make sure your electric is up to the task. I recently picked up this AR630, 1900psi and 2.1GPM. I also got a different trigger, flexible wand, 50` kink resistant non-marring hose, quick connects, and a few different tips for $716


    (Triplex Pump with ceramic plungers and double packing industrial seals)

    Very nice setup.. Love that pump. Is it one of the reasons you bought that model? Have you had any experience with the Axial pump prior to this washer?

  10. #10
    Detailing Gnosis Bunky's Avatar
    Join Date
    Jul 2007
    Location
    Hillsborough, NC
    Posts
    8,305
    Post Thanks / Like

    Re: Pressure Washer questions

    If you are doing driveways, then gas is better due to cleaning ability (pressure/gpm). It will be much faster on tough jobs, If you are just doing cars, electric is fine

    Al
    The Need to Bead

    Likes Civicclutch liked this post

  11. #11
    AspiringProductSpecialist Angus's Avatar
    Join Date
    Mar 2014
    Location
    SE PA
    Posts
    3,604
    Post Thanks / Like

    Re: Pressure Washer questions

    As others have suggested, Gas will always win for all out cleaning power. However, for light duty use you can`t go wrong with a decent electric model. I`ve been using an AR 383 for basic around the house and vehicle cleaning for the past 3 years w/o complaint. I don`t miss the noise, weight, or maintenance required with a gas unit.

    Quote Originally Posted by RaskyR1 View Post
    I dislike dealing with gas units. While you get more bang for the buck they are noisy, can be a PITA to start, have to be filled with gas, and of course the fumes. Plenty powerful electric units can be purchased but you`ll spend $600+ for one and want to make sure your electric is up to the task. I recently picked up this AR630, 1900psi and 2.1GPM. I also got a different trigger, flexible wand, 50` kink resistant non-marring hose, quick connects, and a few different tips for $716


    (Triplex Pump with ceramic plungers and double packing industrial seals)

    That looks like the same Uberflex kink resistant blue hose I`ve been using since January. From my experience, it`s easy to use when the temp is above 80`, but as drops below it wants to stay coiled up. Total PIA.
    Likes Mary B liked this post

  12. #12
    Rasky's Auto Detailing RaskyR1's Avatar
    Join Date
    Mar 2009
    Location
    Eden Prairie, MN
    Posts
    5,011
    Post Thanks / Like

    Re: Pressure Washer questions

    Quote Originally Posted by 13S550 View Post
    Very nice setup.. Love that pump. Is it one of the reasons you bought that model? Have you had any experience with the Axial pump prior to this washer?
    No, not really. I bought it mainly based on the GPM ratings and for the size/ease of wall mounting, though its one heavy SOB! I also know several other detailers who`ve been using this unit for years, daily, without issue. I also considered a CamSpray unit but this one had more cleaning power based on it`s specs.

    I`ve also used several of these 220v electric units dating all the way back to 1992. I think I sold my last unit around 2009 as the space I was temporarily working out of didn`t have a 220v outlet. To be honest it was way over kill for use on cars anyway. The volume shop I worked at back in the 90`s had 2 of these units running which got used daily, 7 days a week, and we were turning out 14-20 cars a day M-F. While we went through a lot of hoses but the units themselves were pretty solid, especially given the abuse they took. They were 3000 psi and 3gpm back then and we dialed them back a hair for use on cars as they could, and did blow the paint off a few cars. These units will have ZERO issue cleaning driveways and would actually be too much pressure IMO for wooden decks. They will also give your arms a workout.

    NorthStar Electric Cold Water Pressure Washer
    Likes 13S550 liked this post

  13. #13
    Detailers Workshop The Driver's Avatar
    Join Date
    May 2012
    Posts
    2,418
    Post Thanks / Like

    Re: Pressure Washer questions

    The holy grail of all budget pressure washers... If you can find one. Karcher K5.85M plus (The only karcher to be made completely in germany).

    It blows away my newer K5 (Made in china) that is supposedly 150 more psi. The build quality is top notch but they are discontinued and almost impossible to get.
    Rupes 21 MK II, Rupes 15 MK II, Rupes 21, Rupes LHR75e, Rupes Duetto, Rupes Ibrid-L, Rupes LH18ENS, Flex PE-14-2, Dodo Juice V1

    Quote Originally Posted by rlmccarty2000 View Post
    At $21.99 it will remain a secret to me.

  14. #14
    Rasky's Auto Detailing RaskyR1's Avatar
    Join Date
    Mar 2009
    Location
    Eden Prairie, MN
    Posts
    5,011
    Post Thanks / Like

    Re: Pressure Washer questions

    Quote Originally Posted by Angus View Post
    That looks like the same Uberflex kink resistant blue hose I`ve been using since January. From my experience, it`s easy to use when the temp is above 80`, but as drops below it wants to stay coiled up. Total PIA.
    Yep. Only used it on a few cars so far. It does seem to have a bit of a coil memory but hasn`t bother me too much as of yet. It matched my logo colors so I had to buy it! LOL!
    Likes Angus liked this post

  15. #15
    Long Time Member GearHead_1's Avatar
    Join Date
    Jul 2003
    Location
    Utah
    Posts
    10,695
    Post Thanks / Like

    Re: Pressure Washer questions

    I have 4 different pressure washers. They range from a 2.0 gallon/minute 2000 psi electric unit up to a 4000 psi, 13 hp Honda gas unit. Each has their place. That said, I believe the average guy that is using one to primarily wash their car would appreciate an electric unit.
    A society willing to trade liberty for temporary security deserves neither and will lose both
    ΜΟΛΩΝ ΛΑΒΕ
    Likes The Driver, Angus, RaskyR1, 13S550 liked this post

 

 
Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. trade gas pressure washer for electric pressure washer
    By 2TONLT1 in forum Car Detailing
    Replies: 0
    Last Post: 03-29-2010, 08:32 PM
  2. Pressure washer questions (How much is too much?)
    By BlinkSaw182 in forum Car Detailing
    Replies: 5
    Last Post: 04-23-2009, 12:07 PM
  3. Pressure Washer Questions
    By volunteer1816 in forum Car Detailing
    Replies: 10
    Last Post: 05-24-2005, 07:08 PM
  4. Pressure Washer Questions
    By volunteer1816 in forum Auto Detailing 101
    Replies: 3
    Last Post: 05-22-2005, 10:31 AM
  5. Electric pressure washer+generator or petrol-driven pressure washer?
    By benpocock in forum Professional Detailer General Discussion
    Replies: 9
    Last Post: 03-08-2005, 12:22 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •