Fender Well Dressing

[512detail]

**there is a poll but if you are on tapatalk just comment with your choice


Ok, for those of you who have seen my posts, you probably notice I suck at fender wells and normally don`t even address them on cars...this is an area I plan on changing

I have purchased a mothers fender well brush and one of those long remote trigger sprayers so I can get under the tight to reach barrels.

I`m looking at purchasing

Chemical Guys Bare Bones Undercarriage Spray

or

Griot`s Garage Undercarriage Spray

I am considering buying a gallon of one of these since I know I need to be dressing fender wells.

BUT I was thinking, I DO have Hydro2 Lite and have used it with good success on fender wells before...

Should I get

1)Bare Bones,
2)Griots Undercarraige
3)keep using Hydro2lite
4)or what is another choice I am missing?

[Poorboy]

4)or what is another choice I am missing?

Bold N Bright diluted 50:50

[ViperGuy21]

I`ve heard good things about hyper dressing. When I do fender wells I use CG VRP(same thing I use on tires)

[512detail]

Bold N Bright diluted 50:50

I never thought about that- I still have 3/4 of my gallon of the liquid left - does it matter if its tap water?

I can give it a shot on my truck- I`m just kind of afraid of drip down onto the top of the tires...but I imagine that`s going to happen with anything

[Poorboy]

I never thought about that- I still have 3/4 of my gallon of the liquid left - does it matter if its tap water?

I can give it a shot on my truck- I`m just kind of afraid of drip down onto the top of the tires...but I imagine that`s going to happen with anything

tap water is fine .. fine mist .. I like it out of a garden sprayer .. it sticks and doesn`t go anywhere

[512detail]

tap water is fine .. fine mist .. I like it out of a garden sprayer .. it sticks and doesn`t go anywhere

I will have to give this a shot - I`m imagining the gel wouldn`t cut with water too well ? so I will try the liquid

[Mike lambert]

Hyper dressing works great but not durable like the solvent based shine and slime products

[Poorboy]

- I`m imagining the gel wouldn`t cut with water too well ? so I will try the liquid

yup .. doesn`t cut at all

[512detail]

yup .. doesn`t cut at all

o well. the gel is my GOTO for my car`s tires...it lasts for about 2 and a half months at my driving rate too! (liquid for my truck`s larger tires)

[dcjredline]

I like Meguiars All Season Dressing from the Detailers line

[512detail]

Hyper dressing works great but not durable like the solvent based shine and slime products

im okay with sacrificing durability as long as the product used isn`t greasy or slimey. that`s why I was thinking Hydro2 lite is a good choice but its kind of expensive for an fender well dressing

[Bill D]

I`m curious about trying this on wheel wells:

CQuartz DLux Plastic & Wheel Coating

[512detail]

I`m curious about trying this on wheel wells:

CQuartz DLux Plastic & Wheel Coating

I have some..would be interested in doing that to MY own fenders one day but would need to go wheel off detail style

[Migue]

Since it`s fender wells and not tires, meaning it`s a "very dirty" area anyways and not too visible, i`ve used solvent based dressings for durability. I currently use Carpro PERL with good results . With the sticky/solvent dressings i used to go like a month or more without having to refresh the coat and with PERL i just mist the area and wipe with a towel until everything`s covered. Either choice (water based/solvent) makes cleaning that area very easy during maintenance, a pressure rinse off takes care of 90% plus of whatever dirt gets under there in between your maintenance washes.

On the Mothers Brush - i have one of those and they are pretty good when you have space (trucks), but for cars i`ve found it to be more uncomfortable than convenient, so i switched to using a combination of MF towel and wheel woolies to get in there when clearance is low.

[Ronkh]

BnB
or
Hydro

Bnb = darker richer