Page 1 of 2 12 LastLast
Results 1 to 15 of 19
  1. #1

    Join Date
    Mar 2009
    Posts
    436
    Post Thanks / Like
    I am experiencing a problem concerning my washer fluid in cold temperatures. When the outside temperature drops below freezing, my "blue" washer fluid is freezing in the reservoir and won`t even come out of the nozzles located on the hood. This is creating a hazard that I am looking to fix.



    Does anyone have a recommendation for a washer fluid that won`t freeze in cold temperatures? I did some research and found something made by Prestone that claims to work to -34 F. I figure I`ll give it a try if all else fails.




  2. #2

    Join Date
    Aug 2004
    Location
    Maryland
    Posts
    1,107
    Post Thanks / Like
    Any good brand of windshield washer should not freeze. I don`t know what kind you have been using but it shouldn`t be freezing. -50 degress is one thing, but tempatures the east coast is seeing right now or has seen so far this winter there shouldn`t be any washer freezing.

  3. #3

    Join Date
    Jul 2002
    Location
    The Old Dominion
    Posts
    2,346
    Post Thanks / Like
    That Prestone stuff is awesome for low temps. However, it`s kinda thick and not unlike antifreeze. I use it when I need to as it`s better than frozen stuff, but I kinda wonder if it`s very good for the wax on the car if it oversprays.

  4. #4
    CCH Auto Appearance, LLC C. Charles Hahn's Avatar
    Join Date
    Jul 2003
    Location
    Lansing, MI USA
    Posts
    8,783
    Post Thanks / Like
    I use some *gasp* Turtle Wax stuff called "Liquid Fire" -- it`s a de-icing formula that has the same basic consistency as the cheap blue stuff, but its orange and works 10x better. I run the stuff year-round, and have never seen any problems with it stripping wax (even as it gets dumped down the back of the truck by the rear wiper)



    Additionally I`m going to put in a plug for Bosch Microedge Excel wiper blades -- they`re the ONLY ones I use anymore because the anco and other brands don`t seem to work as well on any vehicle I`ve ever used them on. Definitely worth the extra couple bucks.
    Charlie
    Automotive Appearance Specialist - Serving Greater Lansing, Michigan
    http://www.cchautoappearance.com/

  5. #5

    Join Date
    Mar 2009
    Posts
    436
    Post Thanks / Like
    Originally posted by General Lee

    Any good brand of windshield washer should not freeze. I don`t know what kind you have been using but it shouldn`t be freezing. -50 degress is one thing, but tempatures the east coast is seeing right now or has seen so far this winter there shouldn`t be any washer freezing.


    Currently, I am using a store brand by the name of Apex that bought from Advance Auto. I bought it for around .88 cents, so I guess I got what I paid for.



    I was experiencing what happened around the 21st or 22nd of December when the temperatures here in the Philadelphia area were around the low 30s during the day and it went down to the teens at night. A day or two after the temperature rose to the mid-40s and the washer system worked fine.



    I think just to experiment I might buy the Prestone and test it out when we get another artic blast in the area.

  6. #6

    Join Date
    Jan 2005
    Posts
    109
    Post Thanks / Like
    I use Rain-X de-icer washer fluid. I find it works very well and never freezes.



    Link here

  7. #7
    salty's Avatar
    Join Date
    Dec 2009
    Posts
    2,207
    Post Thanks / Like
    They should say -35 to -40 on the bottle. If you dilute with your summer stuff or water it seems to knock down the - rating more than you would think.

  8. #8

    Join Date
    Jul 2004
    Posts
    315
    Post Thanks / Like
    Even the cheap stuff shouldn`t freeze. Don`t dilute it at all during winter and you should be fine.

  9. #9

    Join Date
    Apr 2011
    Location
    New Jersey
    Posts
    13,224
    Post Thanks / Like
    Originally posted by Shiny Lil Detlr





    Additionally I`m going to put in a plug for Bosch Microedge Excel wiper blades -- they`re the ONLY ones I use anymore because the anco and other brands don`t seem to work as well on any vehicle I`ve ever used them on.


    Used to be a pet peeve of mine and a friend that you could never get any wiper blades worth a darn in comparison to the factory ones (Detroit, anyway). One pair of refills I got was such a piece of crap I was afraid I had bent the blade, so I went so far as to order the OE blades and refills from the Pontiac dealer...but they were kinda crappy too (not the same as the ones that came on the car). Seems like the aftermarket ones have gotten better, at least in certain brands.

  10. #10

    Join Date
    Apr 2011
    Location
    New Jersey
    Posts
    13,224
    Post Thanks / Like
    I used to use the Delco...umm...I`ll remember the name....Opti-Kleer or Opti-Kleen. I used it for two reasons: one because I had a GM car and right after I used some cheapo washer fluid the pump failed, which I thought might be related, and second, because the Delco stuff was a concentrate that you could mix for different freezing points. FWIW, if IIRC, the lowest you could mix it for was 0°F, which might explain why the cheapo stuff freezes much higher.



    I had a stash of the Opti-whatever, but used it up...last time I was at a GM dealer I asked about it and they didn`t have it anymore.



    I`m doing an experiment right now in my freezer with a little bit of Walmart special SuperTech Winter Formula Windshield Washer Fluid which "Protects to 25°F Below Zero". Notice it says protects, not that it doesn`t freeze at that temp. The freezer test which is approx. 0°F should be a good test, I`ll keep you posted.

  11. #11
    The Grand Marquis Man crobinso's Avatar
    Join Date
    Oct 2004
    Location
    Accokeek, MD USA
    Posts
    587
    Post Thanks / Like
    JM19,



    I think your nozzles may be clogged. Take a pin and stick it into each opening to loosen any dirt or gunk that may have formed in the nozzles. DON`T be aggressive, you don`t want to enlarge the openings.



    Charles

  12. #12

    Join Date
    Mar 2009
    Posts
    436
    Post Thanks / Like
    Originally posted by crobinso

    JM19,



    I think your nozzles may be clogged.



    Charles


    I`m not sure if this is the case. The system works fine on above freezing days without a problem as the fluid comes out of the nozzles with ease. It`s only on below freezing days that it will not come out of the nozzles. :nixweiss

  13. #13

    Join Date
    Jun 2001
    Location
    UK
    Posts
    4,000
    Post Thanks / Like
    The nozzles are the most likely place for freezing. I would flush out the old wash and use a higher concentration of fluid.

  14. #14

    Join Date
    Apr 2011
    Location
    New Jersey
    Posts
    13,224
    Post Thanks / Like
    Well, the WalMart stuff survived the freeze test :up

  15. #15

    Join Date
    Jan 2004
    Location
    Stevens Point, WI
    Posts
    7,046
    Post Thanks / Like
    Often in below-freezing weather, ONE of my nozzles works. I don`t know what happens with the 2nd one, but only one sprayer actually sprays. :nixweiss



    BTW, I have the RainX DeIcer spray too. It`s supposed to clear ice off the windshield well, so I keep a bottle in the car all the time. Instead of using my sprayer (s), I can just grab the bottle in the car and spray. Then I wipe it off with a cotton towel so all that spray crap doesn`t drip down the paint.
    Paul...

    `13 Mazda3i P21S/WG sealant/Paste Glaz/QD+
    `99 Mazda Protege LX - highlight silver - RIP
    `95 Nissan Maxima SE - white - slathered with Pinnacle Paste Glaz - RIP

 

 
Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 6
    Last Post: 12-06-2011, 04:52 PM
  2. ONR as a Windshield Washer fluid...
    By imported_dragula in forum Car Detailing
    Replies: 9
    Last Post: 04-14-2009, 03:51 PM
  3. Windshield Washer Fluid
    By Pockets in forum Auto Detailing 101
    Replies: 9
    Last Post: 08-30-2007, 08:38 PM
  4. Windshield washer fluid question please
    By roadster in forum Car Detailing Product Discussion
    Replies: 4
    Last Post: 10-27-2005, 02:21 PM
  5. And I thought all windshield washer fluid was the same
    By pingable in forum Car Detailing
    Replies: 11
    Last Post: 02-07-2005, 07:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •