Page 1 of 3 123 LastLast
Results 1 to 15 of 40
  1. #1

    Join Date
    Mar 2009
    Posts
    436
    Post Thanks / Like
    I`m about to change my oil, and I need help in choosing a good oil filter for my car. I`ve already decided on Pennzoil Synthetic 5W-30 for my oil, as I`ve used it before and I really like the performance it delivers.



    My local Autozone carries the following filters:



    Mobil 1

    STP

    Bosch

    K & N

    Motorcraft

    Fram



    ...and a few others, but I`d rather get an evaluation on these brands at the moment. If you have any other brands that you think are good, please feel free to add them.



    I`d like to get some opinions on what the highest quality filters are on the list. I`m not really set on a particular brand right now, and I`d just like to get some feedback and/or personal experiences. Price is not really a consideration in the situation, as I am looking for which brand will offer the best performance.

  2. #2

    Join Date
    Nov 2004
    Location
    louisiana
    Posts
    60
    Post Thanks / Like
    k&n filters are really good. thats what i use in my daily driver

  3. #3
    JasonD's Avatar
    Join Date
    Sep 2004
    Location
    Louisiana
    Posts
    4,196
    Post Thanks / Like
    What kind of vehicle do you own?

  4. #4

    Join Date
    Sep 2004
    Location
    Tempe, AZ
    Posts
    501
    Post Thanks / Like
    Forget the Fram. I use the Napa Gold

  5. #5
    JasonD's Avatar
    Join Date
    Sep 2004
    Location
    Louisiana
    Posts
    4,196
    Post Thanks / Like
    Yes, no matter what stay away from Fram. Mobil 1 is good, but so is a few of the others. If you own a Ford I would go with the Motorcraft.

  6. #6

    Join Date
    Mar 2009
    Posts
    436
    Post Thanks / Like
    The vehicle I am working on is a `99 Mitsubishi Eclipse (non-turbo).



    What are the reasons not to use Fram? (I`m inquiring because out of all listed up top they are the most readily available at the retailers in my area)

  7. #7
    JasonD's Avatar
    Join Date
    Sep 2004
    Location
    Louisiana
    Posts
    4,196
    Post Thanks / Like
    Frams split at the seam. The last three I bought did it and one actually popped completely off and dumped about 4 quarts of oil before I could kill the engine fast enough. Thank goodness I was only doing about 5mph or I would`ve ended up in a ditch!



    I think out of the choices I would use Mobil 1 or Bosch. NAPA Golds are good too, but check and see if NAPA has a Racing filter for that application. Those filters are the BOMB! Very thick canister that can stand high pressures, higher flow rate while at the same time better filtration. They are more expensive but a far better filter.

  8. #8

    Join Date
    Apr 2003
    Posts
    1,808
    Post Thanks / Like
    i would go with

    #1 motorcraft (mostly only filters for US cars) $2.50

    #2 purolator premium plus ($3) or pure 1 ($5)



    K&N + M1 are ok i guess, but $11 for an oil filter is kinda steep
    Black Mustang GT

  9. #9
    Pre Med Student NavindraLR's Avatar
    Join Date
    Aug 2004
    Location
    Long Island
    Posts
    1,083
    Post Thanks / Like
    id say bosch or mobil 1, preferably mobil 1

  10. #10
    Honda on the Brain Inspector1's Avatar
    Join Date
    Sep 2004
    Location
    Clermont Co, Ohio
    Posts
    49
    Post Thanks / Like
    Napa gold/Carquest Blue and Wix... all the same manufacturer

    Dana Corp..



    Here`s a site that has tons of Oil and Filter info....

    http://www.bobistheoilguy.com/



    I1

  11. #11

    Join Date
    May 2001
    Posts
    259
    Post Thanks / Like
    I use only Hastings but if they were available here I`d also use Baldwin. Oil analysis is cheap, you should pop for one with each of your favorite filters. That way you`ll know for sure how your filter, oil, and engine for that matter are performing.
    Anyone got a `96 Impala SS for sale?

  12. #12

    Join Date
    Dec 2003
    Location
    Williamstown, New Jersey
    Posts
    1,720
    Post Thanks / Like
    Originally posted by JM19

    The vehicle I am working on is a `99 Mitsubishi Eclipse (non-turbo).



    What make of oil filter does your Mitsubishi owners manual recommend? What was the make of the original oil filter?

  13. #13
    CIXELSYD
    Join Date
    Dec 2005
    Location
    Charlotte, NC
    Posts
    548
    Post Thanks / Like
    Mobil 1 filters are worth the extra cash. They have one of the highest contaminant filtration rates amongst all brands . . . if memory serves correct, the multiple pass efficiency is 95%. The industry average is 80%.

  14. #14

    Join Date
    Jan 2010
    Posts
    1,676
    Post Thanks / Like
    Here are the ones I will use on my car.

    Mobil One

    Purlator

    Ac Delco

    Motorcraft



    DO NOT use Fram!!!! Too many horror stories about them. They come apart, they clog up and don`t filter at all and so on and so on.

  15. #15

    Join Date
    Sep 2007
    Location
    North East PA
    Posts
    667
    Post Thanks / Like
    There are a lot of good filters on the market (and a few not so good). Some have better "filtration", and some have better "flow rate". Idealy, you probably want a filter that has good filtration (not necessary highest filtration), and good flow rate. Filters like Wix, Napa Gold, Purolator Premium Plus (not PureOne) fit into that category. The Purolator PureOne has great filtration, but a low flow rate........... still a fine filter though.



    I highly second the recommendation to check out this site:



    http://www.bobistheoilguy.com
    D.C.T.

 

 
Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 11-27-2007, 02:28 AM
  2. need some help selecting products
    By Logan2224 in forum Autopia-carcare.com
    Replies: 2
    Last Post: 10-08-2007, 11:45 AM
  3. Help selecting a Vac.
    By Tex Star Detail in forum Detailing Product Reviews
    Replies: 7
    Last Post: 04-05-2007, 05:08 AM
  4. Need help on selecting products for new car
    By wytstang in forum Car Detailing Product Discussion
    Replies: 1
    Last Post: 09-02-2006, 01:32 PM
  5. Need help selecting PC Pads
    By Jon718 in forum Car Detailing
    Replies: 6
    Last Post: 10-31-2002, 01:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •