2014 Chevrolet Stingray Paint Correction/Interior Detail @2,000 Miles part 2

[MR Prime Shine]

attention was also paid to the exhaust tips:
Walk around inspection for swirls and imperfections:
Some finishing touches:





After Pictures:









Products used megs100,205,fg400,mothers billet polish,collinite 845,carpro pads,lake country foam pads,

[Old Pirate]

Finish looks great! How was the paint? Hard finish? and also how did the M100 finish down after running one or two passes with which pad? Sorry to ask but would like to know about the new Vette black finish.....Angelo

[jtford95]

Awesome job! Looks wet!

[MR Prime Shine]

Finish looks great! How was the paint? Hard finish? and also how did the M100 finish down after running one or two passes with which pad? Sorry to ask but would like to know about the new Vette black finish.....Angelo

I will say the paint is in between very soft and medium soft but a yellow cutting pad from lake country did the trick . i found myself mixing fg400 with meg100 on the rougher areas and deeper scratches . to answer your question about how it finishes it does finish down good enough but not to my liking that`s why i followed with 205 . keep in mind that this paint is very weird like nothing you`ve ever seen or worked with .hard for me to explain , you will see what i men when you get to work with c7 paint

[Old Pirate]

I will say the paint is in between very soft and medium soft but a yellow cutting pad from lake country did the trick . i found myself mixing fg400 with meg100 on the rougher areas and deeper scratches . to answer your question about how it finishes it does finish down good enough but not to my liking that`s why i followed with 205 . keep in mind that this paint is very weird like nothing you`ve ever seen or worked with .hard for me to explain , you will see what i men when you get to work with c7 paint

Thanks for the information, Looking forward in doing one soon.

[Ronkh]

Beautiful

[JSFM35X]

nice job, what is the polisher you used in the exhaust

[RacerScott]

Very nice job!! What swabs are those for your finishing touches?

[MR Prime Shine]

nice job, what is the polisher you used in the exhaust

Thank You for the compliment!. The polisher is from harbor freight mini 2" air polisher the chemical used was mothers Billet Polish the pad was 3m black finishing pad polisher was set at 60 psi

[MR Prime Shine]

Very nice job!! What swabs are those for your finishing touches?

Thank You the swabs are available from carpro website they are foam swabs and i recommend them

[Todd@RUPES]

Exceptional work and attention to detail