2011 Ducati 1199 Panigale - correction + Opti-Guard

[GoFast908Z]

Got a call from the owner of this stunning Panigale after he saw my work on the forums. This bike was fresh! 196 miles on it when I got my hands on it. Initially it looked pretty good, but upon closer inspection, a fair number of defects and issues were found. After several steps of compounding, polishing, and jeweling the paint to a flawless finish, the permanent Optimum Opti-Guard coating was applied to keep it protected for years to come.

A little background info on the 1199 Panigale:

*From Ducati: The most extreme benchmark
Our Designers and Engineers were given a “blank canvas” to reach the apparently impossible 1199 Panigale targets of 10kg less weight and 25hp more power. Every detail, every dimension and every design decision has been driven entirely by a zero-compromise brief to create the highest performance Ducati Superbike of all time.

Monocoque technology was the fundamental starting point for achieving the twin objectives of reduced weight and increased power. By integrating the activities of the individual components there was a reduction in the overall number of components and their weight. The end result is a reduction in bike weight of 10 kg compared to the 1198. The 1199 Panigale has achieved an incredible benchmark for the sector: dry weight of only 164 kg.

The innovative Superquadro engine, so called because of its massively over-square bore and stroke ratio, has increased power to an absolute production twin-cylinder milestone of 195hp and torque to 98.1 lb-ft (13.5kgm) with user-friendly Riding Modes that deliver that power appropriate to the rider’s style and environment.*





Onto the pics upon arrival






Since this was brand new to the owner, likely these swirls and other defects were installed elsewhere...
























Sticker on the top had to go...








Wheels needed some love, time to remove factory chain lube that sprayed everywhere















After stripping off dealer applied LSP, defects were more visible








These are not dried water marks from a damp towel....bad dealer prep was suspected here....

[GoFast908Z]

Ready for paint correction. Lighting tools of choice. Brinkman Xenon, Brinkman LED, Festool LED SysLite. The Festool unit is pricey, but has proven to be invaluable. Quality unit.








Taped up for safety and keeping it clean. High contact area around the rider`s knees










Initial 50/50, more compounding to further level defects to be carried out still







Tools and product for correction.... Griots 3", Megs MF cutting disc & finishing disc, Megs 105/D300 "strong" premixed bottle for compounding












After compounding. Final polishing to be carried out later














Doing some medium polishing







This is where things changed and I discovered the dealer or factory took a rotary and wool pad to the left side fairings and left some pretty deep trails and swirls behind....















Somebody spilled something nasty here that left the paint very dull and lightly etched.







Corrected







More issues....
















Starting to look better...






Rotary trails even on the tail in the tight places. Careful polishing would be required to remove this safely.

[GoFast908Z]

Compounding, polishing, and jeweling done. Check out the super cool LED`s!











Checking in the sun prior to applying the Opti-Guard







If these do nothing for you, you don`t belong on a superbike























Finished pics out in the sun!

[GoFast908Z]

Wheels were coated as well




















Sickest looking tail lights I`ve ever seen













































You just can`t beat the sun in sunny northern California!









Thanks for looking!!

[mrclean81]

Such a beautiful bike and fantastic work. I love Ducati so much, but that ugly rear shovel would have to go

[Old Pirate]

Wow, that bike has increase it`s speed and blinding to who ever is near by it on the road....Bravo

[AndrewBigA]

awsome work jeff! nice documentation of how you got the job done! love it! the bike looks sweet! the lil griots is also cute.

[tropicsteve]

that was a really nice turnaround jeff with the finish looking dripping wet. the gg 3"da is very handy to have around and i was glad to see the microfiber system worked well with it.

[rurocking]

What an incredible bike and an incredible job to top it. Great work Jeff...

PS. Are you using the original backing plate on the GG3 for the Megs MF correction system?

[Todd@RUPES]

Absolutely great write-up and great way to capture the amazing details of that Italian thorough bred!

[Reality33]

Absolutely bang out job!

I love Ducatis so much and the new one is beautiful.

The work you did , just makes a gorgeous bike look so worthy.

[GoFast908Z]

Such a beautiful bike and fantastic work. I love Ducati so much, but that ugly rear shovel would have to go

Thanks!

Wow, that bike has increase it`s speed and blinding to who ever is near by it on the road....Bravo

It certain had the shine! Thanks Angelo!

awsome work jeff! nice documentation of how you got the job done! love it! the bike looks sweet! the lil griots is also cute.

Thanks Andrew! Where is that E63 eh?

that was a really nice turnaround jeff with the finish looking dripping wet. the gg 3"da is very handy to have around and i was glad to see the microfiber system worked well with it.

Thanks! The 3" is great for bikes.

[GoFast908Z]

What an incredible bike and an incredible job to top it. Great work Jeff...

PS. Are you using the original backing plate on the GG3 for the Megs MF correction system?

Thanks! Yes, the BP that comes with the 3" Griots works fantastic.

Absolutely great write-up and great way to capture the amazing details of that Italian thorough bred!

Thanks Todd!

Absolutely bang out job!

I love Ducatis so much and the new one is beautiful.

The work you did , just makes a gorgeous bike look so worthy.

Thanks so much Reality33!

[Orinda Auto Detail]

Great job Jeff!! Only thing is you forgot tire dressing

[glen e]

jeff - could you just give one sentence on how you use the lights.... why 3 types?