I was contacted by this Client out in Kingston TN to see if I could put a Tru Shine onto his 2003 BMW 330ci. This car was originally a Florida car and from the looks of it, they enjoyed washing the car with sand. So after about 12 hours of work I got this bad boy shining like it was supposed to.
So lets look at what I had to work with when I arrived.
I started by pre rinsing the car and wheels.
Then sprayed some P21s wheel gel diluted at 1:3 ratio to the wheels.(looks clear in the pics for some reason)
I let it dwell for a min and then agitated it and cleaned it using the EzDetail brush.
and cleaned the faces with misc wheel brush
Next I foamed down the car.(Avoiding the freshly treated rag top)
here is what was used:
2 bucket method w/ Grit guards
100% sheep skin wash mitt
Foam cannon with car wash and degreaser mixture
1 wheel bucket with various wheel brushes
P21s wheel Gel
The first rinse to get off any heavy debris
Then a second foam before the hand wash
Getting into all the jams
The Final rinse
Dried off and ready to pull in
You gotta love when the owner has a lift!
The owner want the wheels cleaned and sealed inside and out. So the first thing I did was remove all of the wheels.
Next I got out my Clay magic fine clay and show room shine for clay lube.
I didn`t want any dust getting on the rag top so I took some black plastic and covered it up. I used the Meguiars tape to hold it in place.
Here is the trunk under the halogen lights.
and here is a 50/50
And for the hood here are some before and after and Test areas
Zoomed in
Here is a Test area that I done with the Griots 6in DA w/ Surbuff pad and M105, and Meg 205/ tang pad
And here is the Finished product polished out with Meg 205 and LC Tang pad
Diver fender before
In the process of magic making
Bookmarks