Results 1 to 8 of 8
  1. #1

    Join Date
    Jan 2003
    Posts
    2,320
    Post Thanks / Like
    I was searching around the web for detialing prices and found this.

    http://www.detailusa.net/rates.html

    No Offense to Detail USA or their employee`s so here goes my rant
    ______________________________________

    Exterior Restoration (machine polish) 4 Step Process
    2 door vehicles: $150
    4 door vehicles: $170
    small sport utility vehicles $190
    large sport utility vehicles: $210
    Service time: 3 hrs. to 5 hrs.

    When your vehicle`s surface has damage that is deeper than the outermost surface, it will require machine polishing to repair the damage. The only way to restore the vehicle finish without color sanding is with a four step restoration process; 1)clay, 2)cut, 3)polish, and 4)wax. We begin with the clay treatment described above in the Custom Exterior Detail. Next, we use Meguiar`s TM 1 & 2 paint cleaner , a wool pad, and variable speed polisher to gently remove the damaged paint and oxidation. The Meguiar`s TM 1 & 2 is designed to act as a cleaner over a short period of time, reducing its cutting effect time. The finish is then hand glazed (or machine glazed if needed) with a soft foam pad and a product designed specifically for the finish at hand. This product is used to fill in the finish and make it shine. Lastly, we use the Meguiar`s TM Carnauba Wax for protection. It is important to remember that anytime a car is polished with a wool or foam pad there may be visible swirl marks (especially on darker color finishes) once the polish and wax wears off. Wax or glaze can be used to fill in the marks.

    ________________________________________
    That last line scares me. Anytime a car is polished with a wool or foam pad there may be visible swirl marks.

    I am sure the business is good and all but I don`t think I`ll be taking my car (when I get one) there.

    /end rant

    Thanks for reading,
    Jason

  2. #2

    Join Date
    Oct 2001
    Location
    Arlington, TX
    Posts
    34,077
    Post Thanks / Like
    That last line scares me too. There is no excuse for leaving swirls if the buffer is used properly and the pad is correct for the application.
    www.scottwax.com

    Certified Opti-Coat Pro/Pro 3 installer

  3. #3

    Join Date
    Mar 2009
    Posts
    1,538
    Post Thanks / Like
    <strong class=`bbc`>Disclaimer:[/b] We have absolutely no idea what we`re doing. Please keep that in mind when you wash your car in a couple weeks.


  4. #4

    Join Date
    Mar 2009
    Posts
    5,514
    Post Thanks / Like
    <blockquote class=`ipsBlockquote` >

    <em class=`bbc`>Originally posted by JasonC8301 [/i]
    <strong class=`bbc`>I was searching around the web for detialing prices and found this.

    http://www.detailusa.net/rates.html

    No Offense to Detail USA or their employee`s so here goes my rant
    ______________________________________

    Exterior Restoration (machine polish) 4 Step Process
    2 door vehicles: $150
    4 door vehicles: $170
    small sport utility vehicles $190
    large sport utility vehicles: $210
    Service time: 3 hrs. to 5 hrs.

    When your vehicle`s surface has damage that is deeper than the outermost surface, it will require machine polishing to repair the damage. The only way to restore the vehicle finish without color sanding is with a four step restoration process; 1)clay, 2)cut, 3)polish, and 4)wax. We begin with the clay treatment described above in the Custom Exterior Detail. Next, we use Meguiar`s TM 1 & 2 paint cleaner , a wool pad, and variable speed polisher to gently remove the damaged paint and oxidation. The Meguiar`s TM 1 & 2 is designed to act as a cleaner over a short period of time, reducing its cutting effect time. The finish is then hand glazed (or machine glazed if needed) with a soft foam pad and a product designed specifically for the finish at hand. This product is used to fill in the finish and make it shine. Lastly, we use the Meguiar`s TM Carnauba Wax for protection. It is important to remember that anytime a car is polished with a wool or foam pad there may be visible swirl marks (especially on darker color finishes) once the polish and wax wears off. Wax or glaze can be used to fill in the marks.

    ________________________________________
    That last line scares me. Anytime a car is polished with a wool or foam pad there may be visible swirl marks.

    I am sure the business is good and all but I don`t think I`ll be taking my car (when I get one) there.

    /end rant

    Thanks for reading,
    Jason [/b]</blockquote>
    ...however, this site gave me an idea of how I would like to lay out my site when I open my shop.

  5. #5

    Join Date
    May 2003
    Posts
    1,586
    Post Thanks / Like
    speaking of web sites, my web site will be up in 2 weeks. It will take some time to get it just the way i want it but when it is finished it will be the ultimate detail web site.

    the address will be "www.nyperfectdetailing.com"

    i will keep you updated when it opens

  6. #6

    Join Date
    Oct 2001
    Location
    Arlington, TX
    Posts
    34,077
    Post Thanks / Like
    <blockquote class=`ipsBlockquote` >

    <em class=`bbc`>Originally posted by NY detailer [/i]
    <strong class=`bbc`>speaking of web sites, my web site will be up in 2 weeks. It will take some time to get it just the way i want it but when it is finished it will be the ultimate detail web site.
    the address will be "www.nyperfectdetailing.com"
    i will keep you updated when it opens [/b]</blockquote>
    Definitely post it when you have it up. I am always looking for good ideas to steal for my site

    Mine is at www.scottwax.com

    Let me know what you think. I made some updates a while back.
    www.scottwax.com

    Certified Opti-Coat Pro/Pro 3 installer

  7. #7

    Join Date
    Mar 2009
    Posts
    530
    Post Thanks / Like
    Scott,

    I think you charge too little for that interior. You do a lot for that $!!

    RH

  8. #8

    Join Date
    Oct 2001
    Location
    Arlington, TX
    Posts
    34,077
    Post Thanks / Like
    <blockquote class=`ipsBlockquote` >

    <em class=`bbc`>Originally posted by RH [/i]
    <strong class=`bbc`>Scott,
    I think you charge too little for that interior. You do a lot for that $!!
    RH [/b]</blockquote>
    I think I charged him about $75 just for the interior-all his windows got blown out by a tornado (his car was about 100 feet from where it touched down). What amazed me was that there was more of a mess from him spilling crap all over the place then from the windows being blown out.
    www.scottwax.com

    Certified Opti-Coat Pro/Pro 3 installer

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. For the professional detailers
    By waynethacker@earthlink.net in forum Everything Else
    Replies: 12
    Last Post: 10-15-2009, 09:33 AM
  2. no name professional detailers
    By imported_mirrorfinishman in forum Professional Detailer General Discussion
    Replies: 101
    Last Post: 02-15-2008, 08:09 AM
  3. NE Professional Detailers please come in.
    By imported_agentf1 in forum Car Detailing
    Replies: 5
    Last Post: 12-07-2007, 10:14 AM
  4. Professional Detailers
    By JVG in forum Southwest USA
    Replies: 1
    Last Post: 10-18-2006, 10:48 AM
  5. ever go to professional detailers?
    By RAMTECH in forum Car Detailing
    Replies: 8
    Last Post: 01-01-1970, 12:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •