SIP as a wetsanding remover?

**ajnavo61490** · 05-18-2008, 11:17 AM

I know SIP is very strong and has lots of potential for swirl removal, ect.

What about wetsanding marks? 1500-2000 grit?

plan to apply via rotary w/ LC purple wool pad

**imported_Picus** · 05-18-2008, 11:19 AM

It depends on how well you sand, but yes, it will generally work.

**evolutionwc3** · 05-19-2008, 08:02 PM

I`ve had no problems using SIP and an orange LC CCS pad on 2000 grit on up. Haven`t been below 2000 in a long time, so can`t tell you beyond that.

**gmblack3** · 05-20-2008, 04:50 AM

I would not consider SIP strong, 3M ECC and M105 are strong. SIP is a medium cut polish, like said above 2K is about its limit.

**porta** · 05-20-2008, 07:41 AM

Am I the only one who finishes with 4000 grit? :getdown

**Mindflux** · 05-20-2008, 07:53 AM

Originally Posted by porta

Am I the only one who finishes with 4000 grit? :getdown

Considering the finest I`ve seen that`s readily available is from Meguiars at 3000 grit in the USA I`m guessing you are one of the few that go any higher.

**maesal** · 05-20-2008, 08:01 AM

Originally Posted by porta

Am I the only one who finishes with 4000 grit? :getdown

You`re not alone my friend !!

**wenyu** · 05-22-2008, 07:39 AM

Hmm... I`m a beginner. Can u guys professinal detailer explain to me what is all this 3000 grit , 2000grit , 3M ECC , and M105 is. Sorry if i`m bothering u guys...I go crazy for detailing ! haha.