-
1 Attachment(s)
What a difference!
today i finally found the time to detail my dad`s car. i decided to use some of the new edge 2000 stuff i had, along with ssr 2.5. i used the yellow cutting pad with ssr 2.5 to attempt to take off all of this spider webbing and hazing from the body shop. first, i worked the ssr 2.5 in at around 3, then i cranked it up to 5. check out the difference! i used a 500 watt work light (thanks ranney) to find all the imperfections. i should have bought the stand too, because its hard to hold the work light and take a picture. i got burned :(. anyways, here it is.
treated side
-
1 Attachment(s)
heres the untreated side, horrible.
-
1 Attachment(s)
heres a comparision of the two. i forgot to turn the flash on my camera off, so that may have contributed to the fact that the paint looks lighter.
-
Still see alot of marrying on the treated side are you going to follow up with SSR1. ?
-
Looks alot better!
Were those swirled scratches in the last picture there before you went to work on it, or were they induced by your orbital?
-
actually this is the first time ive touched it... however im pretty sure they were made by an orbital
frozen: i was planinnng on going over with ssr 1 to take care of any little imperfections. im just too tired to do anything. i slept at 12, woke up at 4 to watch wimbledon..