Buffers

Printable View

05-01-2004, 06:18 PM
danhimself520

Buffers

Hey, kinda new to the serious detailing, but would like more info.
I wanted to get a decent buffer. I have a compressor and would like an air driven one, is that better? Also, is it better to use a paste or liquid wax when using a buffer and what kinds?
thanks
05-01-2004, 07:53 PM
fireman03

There are many answers to your questions under the search feature of this forum. Try that first. You should be able to get a good idea of what quality products are available. Welcome to Detail City.
05-01-2004, 08:11 PM
keeotee

I believe you will find the liquid waxes easier to apply with a buffer than the paste simply because of the application of the wax itself to either the paint or the buffer pad.

When you are asking about a buffer, do you mean a random orbit or rotary?
05-02-2004, 09:48 AM
black chevy

I LIKE THE AIR OVER THE ELECTRIC.THE AIR IS LITE WEIGHT. I HAVE A SHOP AT HOME AND MOST EVERYTHING I USE IS AIR POWER.
05-02-2004, 12:07 PM
danhimself520

Honestly, I dont know which is better orbit or rotary?

Black Chevy-I would prefer air too, but I cant seem to find a decent air buffer what is a good rpm, etc. I saw this online, but is it too small? http://www.toolsource.com/ost/produc...TUWWX0XLR1EKE9
05-02-2004, 01:10 PM
Woob

Depends on what you need. Both are two different tools. The rotary is very scary for a first time user since it builds up so much heat and circles so fast. While the PC is very easy to use and just jingles in place. I would say PC if your starting to learn. I havent heard of a professional recommending a rotary buffer just to learn
05-03-2004, 12:19 AM
dr_detail

Re: Buffers

Quote:

Originally posted by danhimself520
I have a compressor and would like an air driven one, is that better?

Air powered buffers/polishers I think are great. I owned one. When I worked in a high volume shop, it was super nice to have (especially since it spun at 5000 rpm no-load speed). However, unless one has the high volume compressor with an enormous holding tank (capable of sustaining 90-100 psi at the tool for more than 5 minutes), I found that it just became more hassle than help. I like my trusty old Black & Decker vairable speed, which are the same ones that have Porter Cable`s label on them (as do Snap-On`s). ;)