How To: Rinseless Wash (apartment detailing/winter washing)

Let`s say you`re a detailer who lives in an apartment, and you don`t have access to a hose for water. Worse yet, you have your own home and hose, but it`s winter! Your car has been dirty for a few days and that nervous twitch you get is starting to concern your friends and family. What is a detailer to do in such inopportune and sanity threatening conditions? A rinseless wash of course!

http://farm8.staticflickr.com/7048/6...8404a50e_b.jpg


But wait, you say, I don`t have hose access and it`s super freakin` cold outside! How am I supposed to wash a car like that, you big dummy?!

Hold on! This is exactly when a rinseless wash proves it`s merit. No hose? No problem! Have a garage? Wash indoors!

The car I`m going to be washing is my 2004 Subaru WRX. It`s been a few days since I`ve washed it and I`ve been driving around in the snow and slush lately. It needs to be clean!

http://farm8.staticflickr.com/7048/6...77ae98db_b.jpg


It has a fine layer of salt and grime on it, and is a perfect candidate for a rinseless wash. Note: If your car is really, really dirty you may want to run it through a touch-free tunnel wash first to knock off all the heavy dirt.

http://farm8.staticflickr.com/7197/6...43463cd8_b.jpg


"Working clean" is one of the most important concepts of detailing, and it begins with your buckets. A clean bucket is a virtue, and it`s the first step in any washing process.

http://farm8.staticflickr.com/7201/6...aee1bfac_b.jpg


Now that your buckets are clean you can fill `em up. From where, you ask? The faucet, of course! More than likely your big 5-gallon wash buckets won`t fit in the sink, in this situation you may choose to use a smaller bucket to fill up your big ones.

http://farm8.staticflickr.com/7184/6...0e68964f_b.jpg


I like doing this because my small bucket allows me to precisely measure the volume of water that I`m using.

http://farm8.staticflickr.com/7205/6...14861b54_b.jpg


Fill up each bucket with about 4 gallons. This is enough so that you won`t run out of wash solution and ensures enough depth of water to keep the dirt at the bottom of the bucket.

http://farm8.staticflickr.com/7200/6...dcce09a4_b.jpg


If your car is excessively dirty, or you`re excessively neurotic, you may elect to use a bug sprayer to pre-treat your vehicle. You will fill the sprayer with the same solution as you will use to wash with.

http://farm8.staticflickr.com/7042/6...3ee73227_b.jpg


Take your buckets and sprayer out to the garage, and get your rinseless wash concentrate. For this example I will be using Blackfire Wet Diamond Rinseless Wash. Optimum, Detailers Pro, and Ultima also offer an excellent rinseless wash.

http://farm8.staticflickr.com/7068/6...9ae1569d_b.jpg


Blackfire suggests using 1 ounce of concentrate for every 2 gallons of water. Since we measured how much water we put into our bucket already, we know to use 2 ounces of concentrate. The handle of my sprayer contains this nifty measuring tool, so I chose to use that.

http://farm8.staticflickr.com/7206/6...ef70e52f_b.jpg


Now you`re going to need to get your washing medium, I like to use a super plush microfiber towel. For this type of wash, a microfiber towel has quite a few benefits over a standard wash mitt. A towel has a significantly greater amount of surface area, allowing you to work cleaner for longer. The deep pile is better suited to trap dirt, and also is able to hold a huge amount of wash solution. Lastly, when you`re done washing you can wring the towel out and use it to get the vehicle 95% dry.

http://farm8.staticflickr.com/7046/6...a421cb48_b.jpg


Place your towel into your wash bucket and allow it to soak for a few minutes.

http://farm8.staticflickr.com/7061/6...8b9f6cab_b.jpg


In the meantime you can take your sprayer and saturate the vehicle surface with wash solution. This is an added precaution against wash induced surface marring, as it helps to loosen the dirt and clean the surface before you actually touch it.

http://farm8.staticflickr.com/7188/6...d908c58e_b.jpg


You`re not necessarily trying to rinse off the dirt with the sprayer, but are rather applying a heavy mist of the rinseless wash to the surface. If you wax your car regularly, it should create nice little beads of water.

http://farm8.staticflickr.com/7066/6...d84284f3_b.jpg


Now you can begin washing. I like to start by folding up the towel into 8 sections (4 per side). This makes it`s size very manageable, it creates 8 different `clean sections` to use while washing, and it makes the towel thick enough to create a cushion between your hand and the paint. This helps to ensure that you`re not using the sand and grit to grind into the paint, but are whisking them off the surface instead.

http://farm8.staticflickr.com/7054/6...12fd9e84_b.jpg


When washing, you want to use a back and forth motion to wipe off the dirt rather than a circular motion. This will help to minimize the appearance of swirl marks. Make it a point to clean out your towel in the rinse bucket often. You should use your best judgement as to how often to rinse your towel, but a good rule would be after every panel or two (depending on how dirty your vehicle is).

http://farm8.staticflickr.com/7204/6...df9224c5_b.jpg


Once your car is completely clean, thoroughly clean out your wash towel in the rinse bucket. Once it is clean as can be, wring it out and get it as dry as possible. You can now dry off your vehicle using the same towel, this will get the surface about 95% dry.

http://farm8.staticflickr.com/7182/6...5d5c8969_b.jpg


In order to get your vehicle completely dry with a streak free finish, you need to mist it with a quick detailer or spray wax. I`m going to be using Blackfire Wet Diamond Polymer Spray, but there are many other excellent products out there to choose from.

http://farm8.staticflickr.com/7204/6...e196868c_b.jpg


Mist a bit of quick detailer onto the surface and work it into the surface using a clean microfiber cloth in a circular pattern. Buff to a shiny and dry finish. You can use this on glass as well as paint, but if you are using a true spray wax you may want to use a dedicated glass cleaner instead.

http://farm8.staticflickr.com/7210/6...a446021c_b.jpg


Last but not least, is the wheels. You should do the wheels last, as they are inevitably much more filthy than your paint and will transfer a large amount of dirt and brake dust into your rinse and wash buckets. Switch to a new microfiber cloth (not the one you used on the paint), dedicate a cheap towel specifically for this task.

http://farm8.staticflickr.com/7059/6...04f3fcf3_b.jpg


Saturate your towel in the wash bucket and wipe down both the tire and wheel. If you keep your wheels detailed this should clean them up nicely, if not, this process may not be sufficient.

http://farm8.staticflickr.com/7182/6...46346922_b.jpg


For complex wheels (or if you have fat fingers) you can use a brush to clean the full face of the wheel.

http://farm8.staticflickr.com/7036/6...6e2cb0e4_b.jpg


Dry your wheels using the same method as you did for the paint. Clean out your washcloth, wring it dry, and wipe off any standing wash solution.

http://farm8.staticflickr.com/7052/6...d0790cd1_b.jpg


Finally you can apply the tire shine. I`ll be using Blackfire Total Eclipse Tire Shine.

http://farm8.staticflickr.com/7060/6...d1f241ec_b.jpg


Grab another cheap cloth and begin by spraying a bit of tire shine directly onto the tire and the cloth.

http://farm8.staticflickr.com/7061/6...f6549337_b.jpg


Work the product into the tire making sure not to leave any `dry` spots.

http://farm8.staticflickr.com/7209/6...02a6d0bf_b.jpg


Allow the product to dry briefly, then buff off any excess to reveal a smooth even sheen.

http://farm8.staticflickr.com/7178/6...abe1f647_b.jpg



And there you have it! A clean and shiny vehicle without the need for a hose, and done so without the risk of surface scratching.

http://farm8.staticflickr.com/7057/6...7abff8b2_b.jpg

Great write-up!!

You can even use warm water to help with rinselessing in the cold.

Very nice write up ! Are you recommending just using one towel for the paint?

I use the same towel for washing and for drying, another towel for QD`ing, and two cheapies for the wheels. I don`t like washing my microfiber often, and I have enough towels that I can do bi-weekly washes for a couple months before needing to clean them!


Sidebar: My neighbors now think I`m crazy. I was doing this at about 2AM when one of my neighbors was taking his trash out. I had my camera, tripod, a few wireless flashes on light stands, and all my washing gear out. He literally stopped in his tracks, then quickly walked to the dumpster without saying anything.

Pretty sweet review! I second the warm water, it helps a lot! So how are you liking the Polymer Spray?

I was a big fan of the BFWD spray sealant, so I was excited for the polymer spray. The new stuff certainly doesn`t disappoint but it also seems less potent. The poly spray seems to be in-between a QD and a stand alone spray sealant. It serves a similar role for me as Optimum Instant Detailer and Gloss Enhancer.

The polymer spray is very easy to use and does make a significant improve to surface slickness. I like it a lot and it would be a no-brainer for me to reorder some.

Connor,

Great review and a nice How-To for those just starting out. Once the wash is complete it`s a great time to treat the finish to some spray wax or polymer sealant....

I use the warm/hot water and it makes a ton of difference on those cold days...:bigups

Very nice review. I have been very Leary of rinseless washes.

Connor. Great write up. Thanks for putting that together.

Great write up Connor!! Very clear and to the point.

Quote:

---

Originally Posted by Concours.John

Very nice review. I have been very Leary of rinseless washes.

---

Unless you`re dealing with super soft paint, there`s no major reason to be leery of rinseless washing these days. Especially with some of the collections you manage, I`d be willing to bet they would save you some time. :bigups

Nice write up Connor. Has a nice flow to it and very easy to read.:)

Quote:

---

Originally Posted by C. Charles Hahn

Unless you`re dealing with super soft paint, there`s no major reason to be leery of rinseless washing these days. Especially with some of the collections you manage, I`d be willing to bet they would save you some time. :bigups

---

Even with super soft paint I`m not sure I`d be leery of it (provide the car isn`t caked in dirt).

When I had my black Chevy HHR (super super super soft paint, even the softest microfiber would leave faint `rainbow` marring) I used to use the most exacting wash method. Two buckets, dunking my mitt after each panel, lots of sud, and I would still get some residual marring.

Then I switched to a rinseless wash, once a week, and eliminated any surface marring. It was the only way I could wash it with out scratching the super soft paint.

Great write-up Connor! Very nice, easy-to-read, and to the point. I enjoyed reading this very much. :bigups:yourrock

Great review and I do live in an apartment and don`t fit in the underground. I have both of these products on order, I would have to say my biggest problem would be dust. It just seems to be on the hunt for my truck.