Turtle Wax Ceramic Spray Coating
Just got a bottle of this from Amazon and excited to apply. Before I do, any useful tips from people who have tried? Any recent reviews or testimonials to level set my expectations?
My paint is clean, however I did just apply P&S Bead Maker yesterday. Not sure if that will effect the performance.
Re: Turtle Wax Ceramic Spray Coating
Yeah id say youd wanna strip any wax you have on the car. Not familiar with this coating, but typically you need to be down to clean, bare paint.
Re: Turtle Wax Ceramic Spray Coating
BM will affect performance I’m sure. But you can always try it. TW is cheap and there’s a lot of product in that bottle.
Re: Turtle Wax Ceramic Spray Coating
Bead Maker is not very durable..just do an IPA wipe down and apply TWCC.
Re: Turtle Wax Ceramic Spray Coating
Because I am lazy and think IPA is a beer, I went ahead and just put it on. First impressions were that it is was super grabby, even over the BM just applied yesterday. And the garage smelled very chemical like an hour after the application, so much so that I had to vent the garage. Overall, not too hard to apply but takes some effort to avoid streaking and a few more microfiber towels than normal to buff clean. I`ll let it cure for 24 hours and post some pics.
Re: Turtle Wax Ceramic Spray Coating
Quote:
Originally Posted by
madflava
Because I am lazy and think IPA is a beer, I went ahead and just put it on. First impressions were that it is was super grabby, even over the BM just applied yesterday. And the garage smelled very chemical like an hour after the application, so much so that I had to vent the garage. Overall, not too hard to apply but takes some effort to avoid streaking and a few more microfiber towels than normal to buff clean. I`ll let it cure for 24 hours and post some pics.
I don’t believe the grabby and streaking would be as bad on a bare surface. Interested in how it looks/feels after curing.
Re: Turtle Wax Ceramic Spray Coating
Apply it SPARINGLY!!!!
I don`t usually use a full trigger pull when applying and I keep the nozzle about 3 feet away from the panel when applying to the top surfaces and about 1-1/2 feet from the sides so only a LIGHT mist is applied to the surface. Take a clean, dry folded microfiber and going one section at a time, buff the product in, then immediately flip the microfiber and buff off any remaining product. If/when your microfiber starts to get damp, switch to another clean, dry one.
It only took one microfiber for me to do my whole Camaro, and by the time I was finished, it was just getting damp enough where I would have switched to a new one if I had any car left to do, or if I had decided to do an immediate second coat (for coverage purposes).
One thing I noticed about the TW Ceramic Spray Coating is that it seems to like LOW humidity and flashes faster and cleaner when the humidity is down and temps are not boiling ... at least in my experience.
Re: Turtle Wax Ceramic Spray Coating
Just started messing with it last week as my TW Seal and Shine was empty. So far it`s pretty straightforward. Clean prepped surface. One microfiber to apply and one for a final wipe down.
Re: Turtle Wax Ceramic Spray Coating
Love the product! As stated above 1-2 sprays per panel! If you have streaking, a damp MF will remove any high spots. Maintain it with their WET WAX as you dry after washing.
1 Attachment(s)
Re: Turtle Wax Ceramic Spray Coating
Thanks for the tips fellas. 24 hours later, here she is. Unfortunately, it`s raining outside and the light isn`t great, but what I can see up close, it looks and feels like there is a glass coating on the paint. I`m going to do a second coat right now because it is easy and therapeutic! https://www.autopia.org/forums/attac...id=37298&stc=1
1 Attachment(s)
Re: Turtle Wax Ceramic Spray Coating
Re: Turtle Wax Ceramic Spray Coating
Sick R8 you got there. It does look glassy, nice work!
Re: Turtle Wax Ceramic Spray Coating
Just got some myself. Hopefully this will be what the Mother`s product wasn`t for me. I already love the TW hybrid spray and shine (black bottle).
Re: Turtle Wax Ceramic Spray Coating
Quote:
Originally Posted by
Don
Apply it SPARINGLY!!!!
I don`t usually use a full trigger pull when applying and I keep the nozzle about 3 feet away from the panel when applying to the top surfaces and about 1-1/2 feet from the sides so only a LIGHT mist is applied to the surface. Take a clean, dry folded microfiber and going one section at a time, buff the product in, then immediately flip the microfiber and buff off any remaining product. If/when your microfiber starts to get damp, switch to another clean, dry one.
It only took one microfiber for me to do my whole Camaro, and by the time I was finished, it was just getting damp enough where I would have switched to a new one if I had any car left to do, or if I had decided to do an immediate second coat (for coverage purposes).
One thing I noticed about the TW Ceramic Spray Coating is that it seems to like LOW humidity and flashes faster and cleaner when the humidity is down and temps are not boiling ... at least in my experience.
This X2....... Same as machine polishing, 2`-3` section at a time, using a couple light sprays, as usual I start at the roof........I did a 2nd coat after 24hrs......
1 Attachment(s)
Re: Turtle Wax Ceramic Spray Coating
Totally agreed on the sparingly part. It became less important on the second coat though - perhaps because it didn`t have as much to grab to.
Here it is after 2 coats (24 hours in between). Upon first sunlight, it had a more silvery tone to it and didn`t necessarily pop. But after a drive in the sun and letting it "bake" a little, it actually became more glossy. Anyway, for the price and the ease of use, I recommend the product. I even did all the pastics, door jams, engine bay & carbon fiber - it was so easy. Anyway, hope this and the other advice helps in this thread.https://www.autopia.org/forums/attac...id=37307&stc=1