Advice on filling swirls, will this process work?
Last fall I bought a Redfire Ford Fusion. I clayed the car, applied Klasse AIO, then Klasse SG. The combo added the nice reflection I was expecting but also a bit of a wet look. A couple of weeks ago during the last Autopia sale I bought some Pinnacle Souveran and love it, a very wet look on the car.
But the car still has some swirls. I don`t want to attempt to remove them, so I have been researching options for filling the swirls. I`ve seen many endorsements of Poorboy`s Black Hole Show Glaze as a nice filler of swirls.
Here`s my question: Could PB`s BH be used in conjunction with the Klasse Twins? I`ve seen some that claim that Black Hole could be applied after the AIO and before the SG.
So could I use this process:
Wash
Clay
Wash
AIO
Black Hole
SG
top with Souveran
If so, how would the Klasse SG react with the Black Hole? SG typically lasts several months for me, but when it`s adhering to paint that has Black Hole on top of it, would that lessen the length of protection the SG would provide?
Re: Advice on filling swirls, will this process work?
Re: Advice on filling swirls, will this process work?
Black hole will not work with the Klasse twins.
Re: Advice on filling swirls, will this process work?
Is that true for any sealant or just Klasse SG? Because in this thread, a rep from Poorboy`s World seems to be saying you can use it before a sealant - Poorboys black hole glaze review
Additionally, if it`s just an issue with Klasse SG, what sealants could you recommend that would work well with Black Hole?
Re: Advice on filling swirls, will this process work?
If you have P. Souveran.
I`d just use PBs Blackhole and top with 2 coats of Souveran
Then post some Pics please..;)
Re: Advice on filling swirls, will this process work?
works with most sealants
just not ksg
Re: Advice on filling swirls, will this process work?
Quote:
Originally Posted by
Ronkh
works with most sealants
just not ksg
Thanks, so everything else is fine, I just need to get a new sealant to replace Klasse SG? I assume PoorBoy`s sealants would work well with Black Hole? In your opinion which would work better, EX or EX-P? Thanks!
Re: Advice on filling swirls, will this process work?
EX has more filling power if I remember correctly
Re: Advice on filling swirls, will this process work?
Quote:
Originally Posted by
Ronkh
EX has more filling power if I remember correctly
EX says it has carnauba, so that makes sense. This is great, it will give me a chance to try out some PoorBoy`s products as I`ve read a look of good things here about them.
Re: Advice on filling swirls, will this process work?
Hint.....
Apply black hole. - Do Not remove
Apply EX over bh, then let haze, then wipe off.
Re: Advice on filling swirls, will this process work?
Quote:
Originally Posted by
Ronkh
Hint.....
Apply black hole. - Do Not remove
Apply EX over bh, then let haze, then wipe off.
words from the king!
it works, I know from 1st hand experience
but you forgot chilled spray and gloss
Re: Advice on filling swirls, will this process work?
I can wholeheartedly recommend Black Hole then Natty`s Blue wax. Natty`s asts about as long as EX and it looks amazing. I have a pic somewhere, I`ll dig it out.
Re: Advice on filling swirls, will this process work?
black hole + ex day one
nattys blue tomorrow
ftw
Re: Advice on filling swirls, will this process work?
Quote:
Originally Posted by
Ronkh
black hole + ex day one
nattys blue tomorrow
ftw
Just ordered Black Hole and EX, will top with the Souveran I ordered last month, thanks to all for the advice!
Re: Advice on filling swirls, will this process work?