I`m going to try this again...I just about had this post finished up when I was inserting pics and got the old Internect Explorer error asking me if I wished to send an error report. it killed about 3 windows I had open and I lost my post.
Let me start by saying that I purchased by Flex from Powerhouse Distributing in Omaha, NE last week. Price was $269 + $12 shipping. It was drop shipped from their main warehouse in South Carolina. The guys there are outstanding to deal with and I already have my replacment black velcro equipped bp. Here is a link to the post on how I tracked one down:
http://autopia.org/forum/car-detaili...e-details.html
I posted some initial pics there from doing the hood on my A6. I thought it turned out very well. This post is about my neighbor`s `04 Toyota Camry that I did over the weekend. It`s gold colored, so some of the paint imperfections (swirls) are a little hard to see. Nonetheless, here are some pics of how trashed this car was:
http://www.jonnypix.smugmug.com/photos/200452424-L.jpg
http://www.jonnypix.smugmug.com/photos/200455552-L.jpg
http://www.jonnypix.smugmug.com/photos/200456070-L.jpg
http://www.jonnypix.smugmug.com/photos/200456515-L.jpg
http://www.jonnypix.smugmug.com/photos/200457492-L.jpg
http://www.jonnypix.smugmug.com/phot...457962-L-1.jpg
http://www.jonnypix.smugmug.com/photos/200457967-L.jpg
http://www.jonnypix.smugmug.com/photos/200458458-L.jpg
After toying around with the Flex on Friday night on my A6, I went straight for a yellow pad, Menzerna Power Gloss compound, and speed 6. I got my pads from Excel Detail and Detailer`s Paradise.
The Flex is a serious machine. It goes up to 480 RPMs in forced rotation and up to 9600 OPMs. I immediately noticed the extra horsepower with the Flex over the PC. It allowed me to correct swirls and scratches much quiker than my PC, even equipped with 4" yellow Edge 2K pads.
I would put 3 small fingers of PG on the pad, spread manually, then turn Flex on at about a 3 to spread the PG a little more. Then, I would go up to 6. This is where the time savings came in over the PC. Although I would do a right-left-right, up-down-up, followed by some back and forth action with moderate to heavier pressure, I only had to do these once. With the PC it would be several times working up to about 5 minutes per section. With the Flex it was taking me about 2-3 minutes.
It will start hopping around on you once the pad starts caking up which seemed like that was after 3-4 panels. It was pretty hot and humid this past weekend in STL, so maybe that had something to do with it. Also, it`s imperative to use the trigger lock on it. While I would start to spread on about a 2.5, I would hit the lock button and then slide my right hand back on the very tail end of it to help keep it balanced. I found that you could put medum to heavy pressure on it without any signs of bogging down on speed 6. Also, as Frostydog posted, you seems pretty receptive to angle it in order to hit A-pillars and such.
Here are some general random pics of it:
http://www.jonnypix.smugmug.com/photos/200453917-L.jpg
http://www.jonnypix.smugmug.com/photos/200454218-L.jpg
http://www.jonnypix.smugmug.com/photos/200454367-L.jpg
http://www.jonnypix.smugmug.com/photos/200460109-L.jpg
http://www.jonnypix.smugmug.com/photos/200460733-L.jpg
I would do 2 x 2 sections at a time. After spreading manuall, then with Flex on about a 2.5/3, I would hit it up to a 6 and go to town. I would do a nice slow (1-3" / second) left-right-left, and then up-down-up, followed by some back and forth action, and then apply little pressure and let the forced rotation really do it`s thing with a left-right-left, and down-up-dow. I would move a little quicker when doing this. As opposed to the PC, where I would have to do this several times, I just did this with the Flex once and it took care of the majority of swirls and scratches (that could be taken care of). Here are some pics of the finished product:
http://www.jonnypix.smugmug.com/photos/200459021-L.jpg
http://www.jonnypix.smugmug.com/photos/200459677-L.jpg
http://www.jonnypix.smugmug.com/photos/200461216-L.jpg
http://www.jonnypix.smugmug.com/photos/200461290-L.jpg
http://www.jonnypix.smugmug.com/photos/200461704-L.jpg
http://www.jonnypix.smugmug.com/photos/200461950-L.jpg
http://www.jonnypix.smugmug.com/photos/200462066-L.jpg
http://www.jonnypix.smugmug.com/photos/200462289-L.jpg
http://www.jonnypix.smugmug.com/photos/200462347-L.jpg
Is the finish completely swirl free? No. After some careful inspection, I still saw some light swirl marks in the corners of the sections I was doing. I think this was more my technique than the Flex. As with the PC, the more hours you log with it, the better you get.
My LSP was Menzerna FMJ. I did use the Flex to apply this on about a speed 1. I think going forward I`ll still be using my PC to apply LSP as it is easier to handle and use, but I was trying to log in as much hours as I could with my new toy.
Also, I would like to give a big thanks to my wife who took on the task of the interior carpet. She busted out our steam vac to make the carpets look somewhat presentable.
Net/net, I really like the Flex. It seems like it`s right between a PC/UDM and a full rotary machine. It still provides a safety net for not burning the paint, although I did get it pretty hot at one point and had to back off a little. It has an extremely nice feel and touch to it. It cuts the time down considerably from using my PC.
