SSR 3 with Edge Yellow pad for PC?

[FiveOhMustang]

How well will SSR 3 work with the Edge yellow pad for the PC for removing a car with heavy amounts of swirls???

I already tryed SSR 2.5 with the Gtreen pad with no luck so should I try SSR 3 with the green pad or try SSR 2.5 with the yellow???

[mgm2003]

I`d try SSR2.5 with the yellow cutting pad first. If you`re using the PC, work it in a 4.5 for a few passes, then jack it up to 6 and go VERY slow and take your time. You might have to go over it 2-3 times (i.e. plan on spending a 30-45 min. or so per panel).

[rollman]

I haven`t tried SSR3 at all yet. I have used a yellow Edge pad with SSR2 and it worked ok . I would like to have used 2.5 but I don`t have any . I would think SSR3 and the yellow pad would knock them down fast . Try SSR3 with the green pad and see what that does then if your not happy kick it up with the yellow pad. Personally I don`t want to spend 30 mins working 1 panel.