Porsche Carrera S - Reflection Perfection -

**wallyStang** · 08-03-2014, 05:28 PM

My Saleen S281 supercharged #372-400 business vehicle.

Light Swirl and Scratch removal.

*Washed with Mothers Gold*

*Clayed with Poorboys World clay. PB Spray and Wipe for lubrication*

*Swirl and scratch Removal. PB Pro Polish 2 via a porter cable speed setting 6 applied by a VC black finishing pad* The finish buffed out very easily. Applied about 7 passed until product broke down and wiped off with ease*

*Finessing Polish consisted of PB Polish with Sealant via a porter cable on speed setting 1 applied using a VC Finessing pad*

*Topped with Nattys Blue x 2 by hand*

*Tires Cleaned and dressed with PB Bold n Bright with a splash of NXT Insanity*

**wallyStang** · 08-03-2014, 05:36 PM

**405HP_Z06** · 08-03-2014, 06:22 PM

Looks great! Nice work.

**Pats300zx** · 08-03-2014, 06:48 PM

Excellent job !!

**Klock** · 08-03-2014, 07:47 PM

Great work! It`s a rolling mirror!

**JSFM35X** · 08-03-2014, 08:14 PM

Looks great, how about introducing us to your Saleen?

**Ronkh** · 08-04-2014, 06:04 AM

Super job!!!!

I agree with Jeff.

**Old Pirate** · 08-04-2014, 06:11 AM

Originally Posted by Ronkh

Super job!!!!

I agree with Jeff.

Originally Posted by JSFM35X

Looks great, how about introducing us to your Saleen?

Same here

**wallyStang** · 08-04-2014, 07:59 AM

Thanks everyone

. As soon as I get home tonight I will share some pics and a write up of my baby.

**WaxAddict** · 08-04-2014, 04:30 PM

Great job on the 997. Maybe you can help me with a similar Porsche, where I used PB Polish with Sealant and it left micro-swirling to the point where it wasn`t worth the effort - my expectation was that PwS would finish down and be done. I used a 5.5" Green CCS pad with a GG6 at speed 4 or 5. Again, on soft Porsche paint. Ideas?

**mnehls86** · 08-04-2014, 04:51 PM

Nice work. I also love the name of your business.

**wallyStang** · 08-04-2014, 07:59 PM

Originally Posted by WaxAddict

Great job on the 997. Maybe you can help me with a similar Porsche, where I used PB Polish with Sealant and it left micro-swirling to the point where it wasn`t worth the effort - my expectation was that PwS would finish down and be done. I used a 5.5" Green CCS pad with a GG6 at speed 4 or 5. Again, on soft Porsche paint. Ideas?

Thank you

. I am not familiar with the GG6 but with a porter cable I always finish on speed setting 1 or 2 with a finishing pad while using Polish with Sealant or Polish with Carnauba Blue. Polish with Sealant is pad dependent so I like to tackle the finish one or two different ways. The first would be start aggressive and slowly kick down a couple notches. I would start on speed setting 6 and as soon as the product starts to break down a little kick the speed down to setting 2 or 1 and just use the weight of the machine to apply. If the finish is still being finicky apply twice. Once for the cut on a high speed, buff off and re apply on speed setting one to jewel the paint.