Spray & Rinse Questions

[JaredPointer]

As a brief update -

I tried again in my wheels on Sunday. I did not have much better luck. However, we used the S&R on my brother`s King Ranch wheels, and it seemed like it might have worked a little better. I dunno what I`m doing wrong.

I`ve seen others with pretty good results, and then here I am screwing it up...

I give??

[Poorboy]

As a brief update -

I tried again in my wheels on Sunday. I did not have much better luck. However, we used the S&R on my brother`s King Ranch wheels, and it seemed like it might have worked a little better. I dunno what I`m doing wrong.

I`ve seen others with pretty good results, and then here I am screwing it up...

I give??

no idea Jared ... take a picture of your bottle ... I`m curious

[Ronkh]

As a brief update -

I tried again in my wheels on Sunday. I did not have much better luck. However, we used the S&R on my brother`s King Ranch wheels, and it seemed like it might have worked a little better. I dunno what I`m doing wrong.

I`ve seen others with pretty good results, and then here I am screwing it up...

I give??

Drive it here. Gimme a try.

[JaredPointer]

no idea Jared ... take a picture of your bottle ... I`m curious

It`s almost empty now, but I will take a picture (if I remember) when I get home.

On another funny product appearance - my Super Slick & Suds turned "cloudy." Any ideas? It did not affect the suds, slickness, cleaning power, etc. Just looks different now.

[Poorboy]

It`s almost empty now, but I will take a picture (if I remember) when I get home.

On another funny product appearance - my Super Slick & Suds turned "cloudy." Any ideas? It did not affect the suds, slickness, cleaning power, etc. Just looks different now.

ok ..I`ll remind you later if you forget ... SS&S sometimes does get cloudy over time , but does not affect its` effectiveness

[JaredPointer]

Pictures of the suspect.

[cartoysautospa]

the problem with a lot of wheel products can be the dwell time and or the wheel becomes dry or the product dry`s before you spray it off.Ideally with any product the wheel needs to remain damp or wet before you spray it off, otherwise the dirt will still cling to the rim.
my rule of thumb is simply this...
rinse off the rims , remove as dirt as possible
spray the rim from the bottom up
walk around and do all 4 rims, buy the time you get back around to the front,start rinsing them off. make sure you hold your wand close enough to power off the dirt. sometimes the outside temp can play a role..but wheel cleaner does work better when it`s cool outside.
now if oyu have not cleaned your rims in awhile and you have excess amounts of brake dust.it could be that the brake dust has penetrated the clear coat of the wheel, if that is the case NO WHEEL Cleaner on earth will remove the brake dust residue.......................it`s call the wheel guy and re spray them. through the clear coat. just because wheels are powder coated does not mean this cannot happen.

[Poorboy]

Jared, did you dilute this bottle? It`s hard to say from my laptop, but it looks a bit light in color

[JaredPointer]

Jared, did you dilute this bottle? It`s hard to say from my laptop, but it looks a bit light in color

No - I poured some out into a spray bottle to dilute. This is full strength. I used it full strength out of this bottle the last few times.

[Ronkh]

Jared, did you dilute this bottle? It`s hard to say from my laptop, but it looks a bit light in color

I was gonna say the same thing

No - I poured some out into a spray bottle to dilute. This is full strength. I used it full strength out of this bottle the last few times.

guess not.

I know that Steve and Pockets tighten each cap before packing, but was the cap loose for any lenght of time? Cuz it does look weak.

[JaredPointer]

No - the cap wasn`t loose. So it`s possible I have a bad bottle and it isn`t me??

[Poorboy]

No - the cap wasn`t loose. So it`s possible I have a bad bottle and it isn`t me??

anything is possible, but there were no there were no other reports from that or any other batch

[JaredPointer]

I bet Dwayne messed with my package before it left the Autogeek warehouse....

[Poorboy]

I bet Dwayne messed with my package before it left the Autogeek warehouse....

probably diluted it for you so you couldn`t mess up

[Autogeek]

probably diluted it for you so you couldn`t mess up

The question is...what did he dilute it with?