Results 1 to 11 of 11
  1. #1
    RobertP's Avatar
    Join Date
    May 2008
    Location
    Kansas City
    Posts
    193
    Post Thanks / Like

    Question About SSR1

    I have about a half bottle of SSR1 that I have not used in about 5 months, yesterday I got it out to polish out my daughters VW and noticed that it had turned into a liquid, I shook it up and it all mixed back up, but is still a thin milky consistency, any ideas of why it did this? My garage is kept at a constant 75 degrees so it didn`t freeze. Any ideas?

    just a note.......The SSR2.5 that I have had the same amount of time is fine.

    Thanks in advance

  2. #2
    southerndetail's Avatar
    Join Date
    Feb 2007
    Location
    Charlotte, N.C.
    Posts
    335
    Post Thanks / Like

    Re: Question About SSR1

    x2?

  3. #3
    Founder Poorboy's World Poorboy's Avatar
    Join Date
    Apr 2003
    Location
    Boca Raton, Fl
    Posts
    14,546
    Post Thanks / Like

    Re: Question About SSR1

    I`m not posative about why that happens but I`ve heard it before. I`m thinking the solvents are breaking down the polish, making it thinner, even though I`ve heard from people who had the opposite happen, where their`s became very thick then again I`ve had a bottle that`s a few years old and it looks the same as it did when new..

    One guess I had was that some bottles come from the top of the batch and some from the bottom... the top being thinner, the bottom being thicker ...either way they all still work
    life is short ..do it while you can

    e-mail info@poorboysworld.com

  4. #4
    RobertP's Avatar
    Join Date
    May 2008
    Location
    Kansas City
    Posts
    193
    Post Thanks / Like

    Re: Question About SSR1

    Alrighty then, thanks for the info.

  5. #5
    COME AT ME BRO JaredPointer's Avatar
    Join Date
    Jun 2004
    Posts
    6,643
    Post Thanks / Like

    Re: Question About SSR1

    I think it has went bad. I suggest sending it to me for testing. I`ll let you know what the problem is.
    I still don`t believe in grit guards.

  6. #6

    Join Date
    Jan 2008
    Location
    Caddo Mills, TX
    Posts
    657
    Post Thanks / Like

    Re: Question About SSR1

    Quote Originally Posted by JaredPointer View Post
    I think it has went bad. I suggest sending it to me for testing. I`ll let you know what the problem is.
    LOL -

    I had the same issue with my SSR 1 - I continued to use it with no problems and actually felt I was able to use a little less than normal. It still works the way it should.

  7. #7
    South Jersey Spartan elk42's Avatar
    Join Date
    Jan 2009
    Location
    Southern New Jersey
    Posts
    138
    Post Thanks / Like

    Re: Question About SSR1

    does this stuff go bad if it freezes? say temps in the 20`s or 30`s?
    Former driver (for now) of the Ultimate Driving Machine. Honda Pilot EX-L 4WD driver now.
    BMWCCA Member since March 2008. (still going strong)

  8. #8
    Wax Waster Ronkh's Avatar
    Join Date
    Mar 2008
    Location
    SwFL
    Posts
    27,090
    Post Thanks / Like

    Re: Question About SSR1

    Quote Originally Posted by elk42 View Post
    does this stuff go bad if it freezes? say temps in the 20`s or 30`s?
    at the risk of stealing someone elses` line.
    send it to me for testing.
    Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!

  9. #9
    South Jersey Spartan elk42's Avatar
    Join Date
    Jan 2009
    Location
    Southern New Jersey
    Posts
    138
    Post Thanks / Like

    Re: Question About SSR1

    but i havent even used it yet.
    Former driver (for now) of the Ultimate Driving Machine. Honda Pilot EX-L 4WD driver now.
    BMWCCA Member since March 2008. (still going strong)

  10. #10
    COME AT ME BRO JaredPointer's Avatar
    Join Date
    Jun 2004
    Posts
    6,643
    Post Thanks / Like

    Re: Question About SSR1

    Quote Originally Posted by elk42 View Post
    but i havent even used it yet.
    Yeah, you better send it on this way. I just don`t think it`s safe for you to use.
    I still don`t believe in grit guards.

  11. #11
    Founder Poorboy's World Poorboy's Avatar
    Join Date
    Apr 2003
    Location
    Boca Raton, Fl
    Posts
    14,546
    Post Thanks / Like

    Re: Question About SSR1

    Quote Originally Posted by elk42 View Post
    does this stuff go bad if it freezes? say temps in the 20`s or 30`s?
    it could ..shake it and see what you get

    Quote Originally Posted by Ronkh View Post
    at the risk of stealing someone elses` line.
    send it to me for testing.
    you have enough

    Quote Originally Posted by elk42 View Post
    but i havent even used it yet.
    they are just over zealous testers

    Quote Originally Posted by JaredPointer View Post
    Yeah, you better send it on this way. I just don`t think it`s safe for you to use.
    not sure if it would be safe to travel that far after freezing
    life is short ..do it while you can

    e-mail info@poorboysworld.com

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. VM, SSR1, FPII and PP question
    By Sveta in forum Auto Detailing 101
    Replies: 0
    Last Post: 09-24-2004, 10:55 AM
  2. SSR2.5/SSR1 question
    By SOG35 in forum Detailing Product Reviews
    Replies: 4
    Last Post: 07-02-2004, 11:18 AM
  3. SSR1 question
    By Dalton in forum Detailing Product Reviews
    Replies: 10
    Last Post: 04-25-2004, 05:40 PM
  4. Question about SSR1
    By SOG35 in forum Detailing Product Reviews
    Replies: 15
    Last Post: 04-22-2004, 09:05 AM
  5. SSR1 Question
    By Dalton in forum Detailing Product Reviews
    Replies: 7
    Last Post: 03-05-2004, 11:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •