Mornin` Guyz/
If you take a real good look at Makita`s OEM Cable construction,it`s a pretty cheap,constructed cable cord,IMOPO.*For what one pays for it/$$$...a Higher Quality Cord should be installed*.You can see the outer jacket get wrinkles in it,pretty easily.Looks to me,that the Insulation is not molded with the wires.But,I went to Home Depot,and bought an *Extension Power Cord,w/a Built-In Strain Relief and a Molded-on 3/Conductor Plug.I believe it`s approx. *9 Feet Long*.I think the Wires are *16/Gauge*,IIRC.They may have longer ones,also.
I do not do the kind of Detailing,some of you do,so I cannot say this is the *Premier Fix*.IMOPO,the Cable Cord I bought from HD,is *Superior* to the one Makita installs.
As the other poster stated,*do not wrap the cord around machine*.Just lightly coil it along side of the buffer,and/or as I do,use a *Releaseable Cable Tie* to keep the cord neat,and put it away,in my Makita Bag.
Regards/
Raymond
Bookmarks