Hi all,
Here in Oz, a popular unit for the beginner is (or was) the Bosch Random Orbital Sander and polisher.
Tech Data:
Code:
Technical data
Power input 400 W
Sanding plate diameter 125 mm
Orbital stroke rate 9.000 ? 26.000 rpm
Eccentricity 2,50 mm
Machine weight 1,9 kg
Functions
Bosch Micro-Filter System
Bosch Electronic
All-round adjustable auxiliary handle
Sanding disc with Velcro-type fastening
Dust extraction
Noise/vibration information
Hide values
Measured values determined according to EN 60745
Total vibration values (vector sum of three directions)
Vibration emission value ah 6,5 m/s?
Uncertainty K 1,9 m/s?
The A-rated noise level of the power tool is typically as follows: Sound pressure level 84 dB(A); Sound power level 95 dB(A). Uncertainty K= 3 dB.
However there has been some issues with the backing plate velcro on the more recent models not holding well on some of the newer pads (e.g. Lake Country, Hex Logic, Edge). I myself haven`t had this issue on both Lake Country and Hex Logic pads.
Some research indicates that it looks and has similar specs to the US based and from all counts might be the exact same machine.
Code:
Tool Specifications
Amperage: 3.3
Country of Origin: Switzerland
Disc Size: 5" (125mm)
Eccentric Offset: 3/32" (2.5mm)
Height: 7-5/8"
Length: 10-1/4"
No Load OPM: 4,500-13,000
Rating: 120 V
Weight (lbs.): 5.0
Working Length: 5"
Includes
Pad Wrench; 5mm Hex -- 1 907 950 006
Soft Backing Pad -- RS031
Sanding Disc -- Included
Microfilter Dust Canister -- RS026
Has anyone used any of these before? If so, attempted to replace the backing plate and whether it`s compatible with a Porter Cable or Meguiars etc?
Psyk: I know this was your first post, but you linked to an external e-commerce site. This is against forum rules. I removed the link to the Bosch site in Oz. Admin
Bookmarks