Correction Help needed.

[basswood]

Blackfire BlackICE as an LSP.

Expensive...are you kidding me?

Worth it...oh yea.

[Ronkh]

Is that your list in order? From 1st to last? Ronkh

I`m assuming that the most expensive is not always the best?

It really is mood dependant, and what I`m trying to achieve.

Add natty`s red to my list and you simply have a list of MY favorites.

Any and all the ones I listed are worth the price of admission.

Just my opinion

[Luvmyvette]

I have some very small swirls and very light towel scratches/marks on the Vette and wanted to pick up a kit that I can use to correct this. I mean its very light stuff on the paint and the clear is hard. What would be the best alternative. I was thinking a flex 3401 or the rupes polisher for the tool. What would I need for pads/polish? Thanks again guys!!! I have been waxing for years but now I`m getting OCD in my older years

Hey VetteMan,
I`m 3/4 of the way through a correction on my 2014 Stingray. After much trial and error I finally ended up using Menzerna FG 400 (after mediocre results with the IP) using Megs Microfiber Cutting pads followed by PF2500 on a Megs MF Finishing pad. I`ve been using a PC DA but I kinda wish I spent the extra money got the Flex as people seem to like it better. This is my first correction so I`m new to all this but the clear seems very hard and many sections have taken multiple passes to completely correct.

Good Luck!

[Ronkh]

Hey VetteMan,
I`m 3/4 of the way through a correction on my 2014 Stingray. After much trial and error I finally ended up using Menzerna FG 400 (after mediocre results with the IP) using Megs Microfiber Cutting pads followed by PF2500 on a Megs MF Finishing pad. I`ve been using a PC DA but I kinda wish I spent the extra money got the Flex as people seem to like it better. This is my first correction so I`m new to all this but the clear seems very hard and many sections have taken multiple passes to completely correct.

Good Luck!

2014 vette color? And with a pc, it will take multiple passes

[Luvmyvette]

2014 vette color? And with a pc, it will take multiple passes

Torch Red Convertible. That`s what I figured and why I regretted not getting the Flex. This was my first correction so it`s been a learning experience.

[Ronkh]

Imho

Menz polishes are made more for rotaries, than da`s

Just my opinion/experience

May be better off trying a different combo.

How much damage needs correcting?

[RaysWay]

Torch Red Convertible. That`s what I figured and why I regretted not getting the Flex. This was my first correction so it`s been a learning experience.

Ya this is why when someone tells me they`re looking for a DA polisher for their Corvette or BMW or Mercedes or other type of vehicle that is known to have hard clearcoats, I strongly recommend a FLEX or RUPES polisher. It just makes life so much easier.

[Ronkh]

Torch Red Convertible. That`s what I figured and why I regretted not getting the Flex. This was my first correction so it`s been a learning experience.

Where are you located?

[VetteMan]

Shopping done:

Machine

Flex Polisher XC 3401 VRG
Flex backing plate system

Products:
BF Black Ice
P Black Label Synergy
P Souveran Paste wax
Poorboys Blue
Poorboys Red
BF Pad cond.
Menzerna 400
Menzerna 4000
Riccardo Clay combo.

LC Hybrid pads 5" in orange, white and black
Micro fiber super towel pack.

Now its time for some fun and a thread soon!!!!!

[Ronkh]

Shopping done:

Flex Polisher XC 3401 VRG
Flex backing plate system

Products:
BF Black Ice
P Black Label Synergy
P Souveran Paste wax
Poorboys Blue
Poorboys Red
BF Pad cond.
Menzerna 400
Menzerna 4000
Riccardo Clay combo.

LC Hybrid pads 5" in orange, white and black
Micro fiber super towel pack.

Now its time for some fun and a thread soon!!!!!

[VetteMan]

Oh, by the way. Here is just a peek of what`s under my hood.

Car makes 1127rwhp at 19 lbs of boost!!! Its a beast and a lot of fun!!!





It`s my street cruiser on weekends only. Its very very well mannered

[Ronkh]

Nice !!!!!

G suit come with the upgrade?

[RaysWay]

[Luvmyvette]

Imho

Menz polishes are made more for rotaries, than da`s

Just my opinion/experience

May be better off trying a different combo.

How much damage needs correcting?

what polish would you suggest, then? I tried Megs 105, as well. I thought it performed comparably to the 400.

It was pretty well swirled everywhere. I`m sure it had some factory damage but it was probably mostly the result of my ignorance in washing and waxing techniques when I first got it. Now that I "get it" I`m trying to correct it and try again! It`s only a few months old.

And to answer your other post, I`m in Northern NJ.

[Luvmyvette]

Ya this is why when someone tells me they`re looking for a DA polisher for their Corvette or BMW or Mercedes or other type of vehicle that is known to have hard clearcoats, I strongly recommend a FLEX or RUPES polisher. It just makes life so much easier.

AHHHHH, I wish I spoke to you a month ago!!!