The Ultimate Glaze Showdown

[Todd@RUPES]

As a new member, it was cool to see this thread bumped up to my "new posts" list. I just finished my spring cruise/show prep on my "survivor" El Camino. After a couple hand rubs and overnight soaks with Meg`s #7 and a machine polish with Meg`s #80 it always can use just one more step before application of an LSP. I had been using 3M foam pad glaze, or Meg`s #3, but was always open for trying something new. Black Hole did a great job. Easy to use by either hand or machine with nice clarity of gloss. After 20+ years of rotary/wool pad polishing, the paint is so dangerously thin that maximum results with minimum abrasives is a welcome quality.
Thanks for the review!



Bill

Looks GREAT

[The Wolfman]

Thanks for the showdown, Todd ! So being that our glaze does have abrasives, it may leave micro-marring on some paints if the abrasives don`t break down properly. I`ve always been a rotary guy, but when using a DA and it leaves marks like those, I switch to a stiffer pad and it does the trick. I`m not sure why it was difficult for you to remove though?? The only thing that I can think of is that it sort of "clumped up" in one spot and if it does that and starts to dry it could possibly be a bit difficult to remove. It works fast and sticks like poop on a diaper, so this may be what you`ve experienced.

https://www.youtube.com/watch?v=n5Rk...ature=youtu.be

https://www.youtube.com/watch?v=s_CmCKm7GMM

Jesse

[chuck2417]

I like the Prima polishes, never tried the amigo but now I feel I have too! Great review. I`ve used the finish and swirl. Both great!