Congrats. You will be amazed at the results you get using the porter cable. Enjoy!
2015 Nissan Pathfinder, Platinum
2012 Fiat 500 Sport
2010 Mazda CX-7 iSport
2000 Nissan Frontier XE
"Life`ll Kill Ya" - Warren Zevon
The first thing I did was remove the handle. I prefer to cup my hand over the top. It increases the "feel".
If you do this (recommended) you must replace the handle with a screw. I got mine from Ace hardware.
If you do NOT put a screw and a washer in the hole the black cap cover will slide right off!!!
It will slide right off the front. You will have a black cap in one hand & a machine in the other.
Although this could be interesting and exciting while you are polishing...it is not a good thing.
(Don`t ask me how I know)
Even the GG 6" has the same requirement. It has a U shaped handle with a bolt on each side.
I remove both bolts and discard the handle. Then I replace both screws into the machine head.
there`s a plastic washer that goes between the backing plate and the polisher body. it slips on the threaded stud on the back of the backing plate.
Lake Country Compression Washers 5-Pack
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks