Time to give up the PC?

[chet31]

Is there a particular swirl you have identified that you have tried to correct but is still there? Or are you able to correct a given swirl, but then another one seems to be introduced?

I ask because if it`s the former, that would mean you are not being aggressive enough, your clear coat is hard. If the latter, you are being too aggressive, your clear coat is soft.

What you are experiencing sounds exactly like what I have gone through w/ my BMW (using a PC and SSR2.5), which has hard clear coat.

[CGdetailing]

nothing m105/m205 cant handle hehe. give menzerna sip a try as well.

[black bart]

just wash with car soap and then polish. nothing will be left after you polish

I never use anything to remove wax or sealant before polishing.

If your polish is capable of removing scratches in the clear coat it sure as hell will remove wax.
Only reason to wash is to be sure no dirt is on the surface before polishing.

[Poorboy]

I never use anything to remove wax or sealant before polishing.

If your polish is capable of removing scratches in the clear coat it sure as hell will remove wax.
Only reason to wash is to be sure no dirt is on the surface before polishing.

exactly

[Bobcat]

Try Megs 105 and experiment with the pads - try LC orange, white and red. Read up on the KBM and go for it.