Which polisher to consider next and why?

[nothingface5384]

I would also recommend the Rupes mini...maybe even a Zentool mini

Another good option would be a GG6 with the upcoming Boss 3in backing plate

[Raymoche]

I have a Defelsko, that I trust.

I am leaning towards the MINI more, since it seems to fill the void nicely, and then in the future consider a rotary.

I`ve recently got a lot of wet sanding work, so I was just thinking a rotary, then 3401 might clean up a lot faster, but who knows, perhaps the mini can save time by cutting out a step, after all 15-30 seconds longer on one machine is probably less time than machine 1, wiping, switch to machine 2, apply compound/polish, work, wipe.

[Accumulator]

I haven`t picked up a rotary since early 80`s.........

I hear they`re much lighter now.

My Metabo is a *LOT* lighter than the Milwaukee I ran in the `70s, a good mbit lighter than the Makita too.

[Civicclutch]

My Milwaukee rotary is a heavy beast but if I`m buffing a car out cause of some serious swirls and deeper marring I`ll pull it out and use wool pads then follow with one of my DAs. Just quicker that way


Sent from my iPhone using Tapatalk