Thanks for the quick replies, all. Let me answer some of these questions:
I`ve been detailing cars for 20+ years. I`ve been using the DA for 15. I was running the DA between speeds 5-6 with a yellow pad from Chemical Guys and the Sonus SFX1 polish; followed by an orange pad and Sonus SFX2. Pressure? Enough to generate too much heat to the point my backing plate, with hook/loop, failed.
I know - that`s too much pressure.
Backing plate is 6" and the Pads are 7". I took one pass that includes time going horizontal and vertically across the panel. I took a second pass on an area and saw no real difference, so I didn`t continue that on the rest of the panels - why invest the time?
I have no plans to continue at that car wash. I sent them the photos and, while polite about it, I will be going elsewhere. Our local gas station has a touchless option, but no monthly club, which I like as I was taking it through the old one once a week. I am trying to get them to consider the same so I can use it. I use it on my wifes car and, while it doesn`t always get it 100% clean, it sure as heck doesn`t scratch the car to hell and back, either!
My challenge? 20 years ago, I didn`t have a family. I do now and I work 65+ hours a week. My time is limited for car detailing now, so I`m relegated to quick washes and then I bring it home and use a product like F11 to put a nice shine on it. I then buff everything out 1-2 times year when I do make the time for it. Until my kids are through school? It`s likely going to be that way.
I did some research and I purchased Meguiars Cut 105. I plant to try that, along with the yellow pad and my new 6" backing plate that`s coming. Any other suggestions on a good pad? I just bought that pad as it reviewed well for cutting. Ugh.
I am going to try and upload photos so you all can vomit!
Thanks again,
Shumax
Bookmarks