I`m working on a badly oxidized Bayliner Capri and am at the stage where I want to seal in the results. So far this has been my process...



- Sand with 1000 grit by hand with softblock

- Sand with 1500 grit Norton 6" discs on DA

- Sand with 2000 grit by hand with softblock

- Compound with 3M Marine Compoun on wool pad with Makita



Tomrrow I am going to finish polish and seal or wax. What I am thinking of using (only because I just got it today) for finish polish is Opti-seal if it has enough cut...if I need more cut I`ll switch out for something else. After Opti-seal I`m thinking about Collinite 870 liquid fleetwax. Does anyone know if 870 will bond to Opti-seal?