Results 1 to 8 of 8
  1. #1

    Join Date
    Jun 2018
    Posts
    6
    Post Thanks / Like

    Question about cmx ceramic spray coating.

    Hello I have a question regarding this spray. I washed and cleaned and dried my cars and applied this coating on them about amonth ago. It went on and off so easy and they looked beautiful. Now this past weekend I washed them again and I wanted to apply the ceramic spray coating again but I noticed on the hood of my truck it left swirls and was really hard to get off and on doors it felt like swirl Mark`s. It also did it on my car as well. I thought maybe i hit a coner that had a lil water still idk what it was from. What could it have been to make it not like easy to wipe off. Any information would be appreciated I also have follow up question after this gets answered.

    Sent from my SM-J337P using Tapatalk

  2. #2

    Join Date
    Apr 2020
    Posts
    26
    Post Thanks / Like

    Re: Question about cmx ceramic spray coating.

    I`m a little unclear what is happening.

    Perhaps you can give me a call to 714-891-3364 x241 and we can have a conversation and email some pictures to me at jimd@mothers
    Jim Dvorak
    Public Relations, Customer Service & Technical Support
    Mothers® Polishes•Waxes•Cleaners
    Tel: 714-891-3364 x241
    Email: add ".com" to my username to email me.

  3. #3

    Join Date
    Jun 2018
    Posts
    6
    Post Thanks / Like

    Re: Question about cmx ceramic spray coating.

    Quote Originally Posted by jimd@mothers View Post
    I`m a little unclear what is happening.

    Perhaps you can give me a call to 714-891-3364 x241 and we can have a conversation and email some pictures to me at jimd@mothers
    Thank you I will try and call later I`m in ny so idk what zone you are in. I have no pics. But let me.see if I explain better I know my original post was all over. Let`s take my hood is black I applied the spray coating on to it then used applicator to spread it over my hood I wait a minute or so then I take my microfiber towel and start to wipe it off and it seem.like its just spreading it all over and not comming off. Then its just smearing all.over the hood and dont come off. The door panel also looked wavy&streaky. The first time I used it it worked out great this is second time idk what it could be maybe I hit a wet part on the car and thats why it was smearing

    Sent from my SM-J337P using Tapatalk

  4. #4

    Join Date
    Jun 2018
    Posts
    6
    Post Thanks / Like

    Re: Question about cmx ceramic spray coating.

    Here`s some pics of it.

    Sent from my SM-J337P using Tapatalk

  5. #5

    Join Date
    Apr 2020
    Posts
    26
    Post Thanks / Like

    Re: Question about cmx ceramic spray coating.

    Spray it on an applicator or towel (and make sure the towel is folded into a pad) for best results -- not directly on the surface.

    You may have too much product on the surface.

    Try a water-dampened towel, wipe it around, and buff dry with a fresh towel.

    And if it`s below 70 degrees, you might need up to 10 or 15 minutes to set.
    Jim Dvorak
    Public Relations, Customer Service & Technical Support
    Mothers® Polishes•Waxes•Cleaners
    Tel: 714-891-3364 x241
    Email: add ".com" to my username to email me.

  6. #6

    Join Date
    Sep 2004
    Location
    Perth, Western Australia
    Posts
    3,447
    Post Thanks / Like

    Re: Question about cmx ceramic spray coating.

    How did you go?

  7. #7
    01GreyStangGT's Avatar
    Join Date
    Oct 2008
    Location
    Springboro, OH
    Posts
    493
    Post Thanks / Like

    Re: Question about cmx ceramic spray coating.

    Using a foam applicator gets me the best results with CMX.
    2014 Ford Mustang GT Track Pack- Black
    2015 Chevrolet Silverado- Summit White
    2017 Jeep Wrangler Unlimited- Silver

  8. #8

    Join Date
    Apr 2020
    Posts
    26
    Post Thanks / Like

    Re: Question about cmx ceramic spray coating.

    I recommend a microfiber covered applicator pad for CMX application.

    The blend of microfiber in most applicators has a low absorbency factor so it spreads product better than with a towel (which tend to have a higher absorbency factor and more material so it`s wasting product).

    A microfiber pad simply works more efficiently than a towel, and is not going to scratch the paint.
    Jim Dvorak
    Public Relations, Customer Service & Technical Support
    Mothers® Polishes•Waxes•Cleaners
    Tel: 714-891-3364 x241
    Email: add ".com" to my username to email me.

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Turtle Wax Ceramic Spray Coating
    By madflava in forum Car Detailing Product Discussion
    Replies: 67
    Last Post: 06-23-2020, 05:14 PM
  2. New Mothers CMX CERAMIC SPRAY COATING
    By Alfisti in forum Car Detailing Product Discussion
    Replies: 226
    Last Post: 06-22-2020, 04:27 PM
  3. FAQ: Mothers CMX Ceramic Spray Coating Uses
    By jimd@mothers in forum Mothers High Performance Car Care
    Replies: 0
    Last Post: 05-23-2020, 12:35 PM
  4. Review - Adams UV Ceramic Paint and Spray Coating
    By The Guz in forum Detailing Product Reviews
    Replies: 42
    Last Post: 05-19-2020, 09:11 PM
  5. Safe detail spray on Ceramic/Glass Coating
    By richiebohrer24 in forum Auto Detailing 101
    Replies: 8
    Last Post: 04-23-2019, 06:34 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •