Rasky's Auto Detailing - High-End Auto Detailing and Premier Coating Installer, Minnesota Metro Area

[RaskyR1]

2010 Black Mustang, 2-step paint correction and coating application.

Process:

Wash – Meguiar’s Hyper Wash and natural lambs wool mitt
Wheels – Sonax Wheel Cleaner Plus & various brushes.
Tires - Cleaned with Megs D143 and Tuf-Shine brush. Dressed with Megs Hyper Dressing 3:1
Paint Prep – Griot’s Fast Surface Prep Mitt and Glide as lube
Paint Correction - Groit`s Fast Correct Cream on the G15 with Griot`s MF BOSS pads followed by Optimum Hyper Polish on the G15 with yellow BOSS pads. Tight areas done with Megs G110v2 and Flex PE14 with 1”-2" pads
Exhaust - Optimum Metal Polish
Trim - Poorboys Trim Restorer
Glass – Megs D120 and Griot’s PFM glass towels
Coating Prep – Optimum Opti-Prep
Coating- 1 coat Optimum Gloss-Coat


Before pics. Hood had been repainted and has some deep sanding marks in it still.












I re-sanded the channel on the hood with 3000 grit wrapped around a dowel from my Jason Killmer sanding block kit.


50/50




Finished pics
























Thanks for looking,

Rasky

[RaskyR1]

Beautiful

How is csl to work with?

Really easy, but I can see the average consumer messing it up badly. I had one small blemish I had to touch up between the rear bumper cover and the quarter panel. Polished up easy and no issues with recoating.

[Ronkh]

So not Ron proof

[RaskyR1]

So not Ron proof

LOL! It`s really easy, but it`s wipe on wipe off...don`t let it sit like some other coatings and don`t do too large of an area either. I also used a few more towels to level then I normally would. As long as you take your time and inspect each area well as your working it`s a piece of cake.

I would toss the (single) applicator they give you in favor of the CarPro block and MF suede.

[Ronkh]

Cool

Thanks

[RaskyR1]

2013 Buick Enclave, 2-step Correction, CQuartz Finest Coating Application

This vehicle was a recent purchase by the parents of one of my good clients. After seeing how poor the paint looked he wanted to get it looking proper and protected for them. 

Process:

Wash – Meguiar’s Hyper Wash and natural lambs wool mitt
Wheels – Griot’s Heavy Duty Wheel Cleaner with wash mitt & various brushes. Polished with CG Metal Polish
Tires - Cleaned with Megs D143 and Tuf-Shine brush. Dressed with Megs Hyper Dressing 3:1
Paint Prep – Griot’s Fast Surface Prep Mitt and Glide as lube
Paint Correction - Groit`s Fast Correct Cream on the G15 with Griot`s MF BOSS pads followed by Megs M205 on the G15 with yellow BOSS pads. Tight areas done with Rupe LHR75 and Flex PE14 with 2" pads
Exhaust - Optimum Metal Polish
Glass – Megs D120 and Griot’s PFM glass towels
Coating Prep – Optimum Opti-Prep
Coating - 2 coats CQuartz Finest


Before pics




A couple sets of pics showing before, after Griot’s Fast Correct Cream, and then after M205.












After pics










Fenix PD35



Thanks for looking,
Rasky

[Ronkh]

You make it look easy........ I know better.

Beautiful as always

[mg031]

Flawless as is the rest of your work

BTW, I just started using the Griot`s Cream`s and thin MF Cut pads. Very impressive stuff.

[RaskyR1]

Flawless as is the rest of your work

BTW, I just started using the Griot`s Cream`s and thin MF Cut pads. Very impressive stuff.

Thank you!

Yep, the Fast Correct and Fast MF pads are an awesome combo for sure! Cut and finish very well with little or no dust.

[RaskyR1]

2014 BMW X5, 2-step Correction and CQuartz Finest Coating Application

Process:

Wash – Meguiar’s Hyper Wash and natural lambs wool mitt
Wheels – Griot’s Heavy Duty Wheel Cleaner & various brushes.
Tires - Cleaned with Megs D143 and Tuf-Shine brush. Dressed with Megs Hyper Dressing 3:1
Paint Prep – Griot’s Fast Surface Prep Mitt and Glide as lube
Paint Correction - Groit`s Fast Correct Cream on the Rupes MKII21 with Griot`s MF BOSS pads followed by Opt Hyper Polish on the G15 with yellow BOSS pads. Tight areas done with Rupes LHR75e and Rupes Nano.
Exhaust - Optimum Metal Polish
Glass – Megs D120 and Griot’s PFM glass towels
Coating Prep – Opti-Prep wipe down
Coating – 2 coats CQuartz Finest


Before pics






After compounding with Fast Correct (lower part of door untouched)


Doing tight areas with the Nano


Finished pics












Thanks for looking,
Rasky

[RaskyR1]

2011 Ford F-150, 2-step Correction and Optimum Gloss-Coat Application

Process:

Wash – Meguiar’s Hyper Wash and natural lambs wool mitt
Wheels – Griot’s Heavy Duty Wheel Cleaner & various brushes.
Tires - Cleaned with Megs D143 and Tuf-Shine brush. Dressed with Megs Hyper Dressing 3:1
Paint Prep – Griot’s Fast Surface Prep Mitt and Glide as lube
Paint Correction – Megs M100 on the rotary with PFW pads followed by Opt Hyper Polish on the G15 with yellow BOSS pads. Tight areas done with Rupes LHR75e.
Glass – Megs D120 and Griot’s PFM glass towels
Coating Prep – Opti-Prep wipe down
Coating – 1 coat Optimum Gloss-Coat


Before pics




Heavy swirls and dealer installed holograms




After pics













Thanks for looking,
Rasky

[Ronkh]

Looking GREAT !!!!

Lots of real estate there.

How do you like using the nano? I`m starting to rethink having gotten the long neck instead of short.

[RaskyR1]

2016 HD Street Glide, Paint Correction and Optimum Coating Application

Before pics






Rupes Nano logged some serious hours on this job in all 3 modes (rotary, 3mm, and 12mm)




After pics























Thanks for looking,
Rasky

[RaskyR1]

Looking GREAT !!!!

Lots of real estate there.

How do you like using the nano? I`m starting to rethink having gotten the long neck instead of short.

Thanks!

I love it but I`m noticing the amount of time I`m spending on jobs increasing too! Especially on the Harley! There are things I dislike about it but overall it`s great.

[Ronkh]

Thanks!

I love it but I`m noticing the amount of time I`m spending on jobs increasing too! Especially on the Harley! There are things I dislike about it but overall it`s great.

Cool. Thanks.

What are the dislikes?