NEW! PUMP your PC or Flex UP with the ONLY OFFICAL KEVIN BROWN METHOD KITS!!!

**egoXtension** · 05-13-2009, 06:29 PM

ROLF

Too Funny!

Yes, I was a 98-pound weakling before I found da KB method and got PUMPED UP!

Now I kick polish dust in the faces of the da rotary dudes!!!:cursing:

Rock On! KB

(well, actually I havent used KBM...yet)

**imported_glfahlc** · 05-13-2009, 08:00 PM

am i to conclude from this that KBM only works with meguiars..

**Dave1** · 05-13-2009, 10:09 PM

"PC`s are baaaack"........

**Todd@RUPES** · 05-13-2009, 10:42 PM

**imported_Termigator** · 05-13-2009, 11:04 PM

I still have many of CMA`s original concave polishing pads. Those should work pretty well with 105/205 too, right?
Also, would the Kompressor pads be considered flat?

**Todd@RUPES** · 05-14-2009, 12:41 AM

Originally Posted by Termigator

I still have many of CMA`s original concave polishing pads. Those should work pretty well with 105/205 too, right?
Also, would the Kompressor pads be considered flat?

Yes they will should work very well, actually, as they, by design, focus the pressure of the pad evenly.

The Kompressor pads work nicely with the KBM/PC, but the flat pads work just a little better.

**imported_Termigator** · 05-14-2009, 06:07 AM

Good to know. Thanks.

TOGWT · 05-14-2009, 11:29 AM

Originally Posted by glfahlc

am i to conclude from this that KBM only works with meguiars..

From reading the verious posts / forums it should work with any linear type abrasive that require time and pressure (i.e. non-diminishing abrasives)

**imported_Termigator** · 05-14-2009, 12:12 PM

Originally Posted by TOGWT

From reading the verious posts / forums it should work with any linear type abrasive that require time and pressure (i.e. non-diminishing abrasives)

Who else makes polishes/compounds with non-diminishing abrasives?

**RustyBumper** · 05-14-2009, 04:25 PM

Does anyone know when the new paper is going to be released?

**Todd@RUPES** · 05-14-2009, 04:37 PM

Originally Posted by Termigator

Who else makes polishes/compounds with non-diminishing abrasives?

I believe Mark V`s 350 Quik Cut uses non-diminishing abrasives, as well as System 1.

**imported_blk45** · 05-14-2009, 05:12 PM

Originally Posted by Termigator

Who else makes polishes/compounds with non-diminishing abrasives?

Originally Posted by th0001

I believe Mark V`s 350 Quik Cut uses non-diminishing abrasives, as well as System 1.

Another thing to remember, it`s not just the non-diminishing abrasives. It`s the size and quality of those abrasives, and that is where Megs distances themselves from the other companies that use NDAs. The SMAT (Super Micro Abrasives Technology) that Megs uses is very impressive.

**imported_Termigator** · 05-14-2009, 05:30 PM

Originally Posted by th0001

I believe Mark V`s 350 Quik Cut uses non-diminishing abrasives, as well as System 1.

Never heard of them.

**Tim Lingor** · 05-14-2009, 06:38 PM

Downright awesome! :notworthy::notworthy::notworthy::notworthy:

I love the resemblance to a very famous body builder! Kevin, I see you grew your hair out a little... LOLOLOL Just kidding! :cornut:

Seriously, Todd, it looks like you and PAC have put together a great kit of some very proven products! Well done!

Tim