Mirka Abralon Sanding Discs

[Accumulator]

hacadacalopolis- Appreciate your input...and it seems that *everybody* likes Norton, can`t recall any negative takes on it.

[JustJesus]

... The replacement arrived about the time they announced a *new* GG3 (the one they sent me was the old one) and AFAIK they won`t replace that older one with the new version if/when mine dies. I`ve only used it a few times and it wasn`t satisfactory with regard to correction. Might work OK with the Mirka/etc. sanding disks but I sorta doubt I`ll ever do that stuff again.

If you have their newer model (which I`d assume is the case) it might work fine. Their 3" pneumatic works OK and is what I reach for when doing spot-correction.

Bummer on that timing. I`m guessing it`s the newer version, as i got it within a year.

So I tried it out, to see if it can do some correction. Well, with the Mirka, I ended up burning through the clear (test panel has seen a few sessions of damp sanding/buffing/polishing), so yes, it *can* sand.

I followed it up with BOSS Correcting Cream on a Megs 3" MF cut disc (easy, and left the finish looking pretty good)

Then, finished off with BOSS Perfecting Cream on a LC 3" White Polish pad. Turned out pretty good. Except for the two small spots where the clear was gone.